4 Hole Dental Shark High Speed Handpiece 300000rpm Low Vibration

4 Hole Dental Shark High Speed Handpiece With Anti Retraction Head

One piece stainless steel head Anti-retraction system— avoid cross infection Big torque and Low vibration Long life and Low noise Autoclavable

4 Hole Hand Piece DR-180 Technical Data

4 HoleTurbina Dental DR-180 Description

1. German ceramic ball bearing; open style cartridge.

2. Four separate air and water spray, with anti-retraction head, effective cooling for bur and treating contact surface.

3. Medical type Stainless steel body, Light weight 55g( same as one egg).

4. The handpiece have streamlined design, comfortable for hand feeling, easy to clean.

5. 1 year warranty.

Company information

We are manufacturer for producing and supplying high speed dental handpiece , low speed dental handpiece, dental implant handpiece, endodontic files, and other relative dental instruments for many years .OEM & ODM orders are available , if you do not find the right items you are looking for,kindly please leave us message , we will reply you within 24hours .Thanks!

After each patient use , maintenance should be done as follows:

1. First remove the diamond burs , and clean up all the teeth on dental handpieces precipitate

2. Use a metal needle to clean the spray holes and fumaroles

Note: The spray holes and diamond burs into 40 -degree angle , fumaroles and diamond burs to a 30 degree angle

3. Place the clean lubricating oil is sprayed into the axial hole 1-2 seconds ( diamond burs is plugged holes )

4. In the bottom of the handpiece were ( with / without quick connector ) two kinds of styling , make the right amount of lubricant is injected into the bottom

5. The handpiece with quick connector combination ( first determine the water switch is turned off )

6. Replace the diamond burs , surrounded by white silk cloth handpiece head ( make sure the needle does not touch the diamond burs and white gauze , so as not to tie )

7. pedal depressed for about 20 seconds , look at whether there is in white gauze on any stain. If there are stains on the white gauze , again, add oil , starting from item 4 continued routine maintenance , know that white gauze until no stain

8. Finally, no more than 135 degrees Celsius temperature and high pressure sterilization

Henan Dorit Biotechnology Co., Ltd. always takes “quality bearing responsibility, technology creating advantage, innovation leading the future ” as its development concept, and conscientiously implements to the operation, management, product research and development and manufacture.

During the process of serving global oral industry , Dorit takes every step as walking on the thin ice. We not only innovate bravely, but also go ahead steady step by step.