Mirror Chrome inks paint resin for glass
The mirror chrome ink can offer mirror/chrome appearance by spray
on the back side of glass, plastic. Mirro chrome ink is a unique
ink that is applied to the reverse side of glass or tempered glass
to create a reflective mirror like finish. This mirror-like
printing ink, suitable for the glass and tempered glass ,high
performance in the boiling water test. Special resin for product
mirror-like printing inks, good adhesion with common glass and
tempered glass materials,make the electroplated-effect more
excellent and obvious. Eeasy to spray and forming a shiny chrome
finish that matches real chrome very well.
1. Sprayed on primer black polyurethane and activator
2. Then sprayed with a light coat of liquid chrome ink
3. Apply a clear coating(varnish) of liquid chrome to make it shine
Instructions
Step 1.
To obtain the most dramatic chrome effect, liquid chrome paint must
be applied to a smooth black surface that is coated with a black
ink.
Step 2.
Wipe the area to be coated with industrial alcohol or lacquer
thinner/solvent to remove any residual grease, wax or oil residue,
being careful to avoid scratching the surface. For best results,
the surface must remain scratch-free and smooth like glass.
Step 3.
Stir and pour the Body Chrome Ink into the gun or gun cup. NOTE: No
additional dilution is required or needed. Adjust the gun to a very
light material flow and spray 3 or 4 very light coats, stopping as
soon as full opacity is achieved.
STEP 4.
Spray two-part polyurethane clear varnish and polish to a smooth,
perfectly flat surface.
Storage
Use in a well-ventilated area.
