Detached 0.3mW Automatic On Off Light Sensor Remote Control Setting
Detached Design With Remote Control 120-277VAC Microwave Motion
Sensor
Features:
1. Operating voltage would be 120-277VAC 50/60Hz.
2. Have CE and RoHS certification.
3. Optional detection range,time delay and daylight threshold.
4. Compact size particularly suitable for Tri-Proof lights.
5. Loop in and loop out for easy installation.
6. Operating temperature range would be -20°C+60°C.
7. IP 20 with 5 years warranty.
8. Microwave power is less to 0.3mW.
Product Description
Input voltage | 120~277VAC 50/60Hz |
Switching capacity | Max.3.0A@120Vac,50/60Hz; Max.2.0A@277Vac,50/60Hz |
Stand-by power | ≤1W |
Detection area | 50%/100% |
Hold time | 5s/1min/5min/10min |
Daylight threshold | 2Lux /10Lux /50Lux/Disable |
Microwave frequency | 5.8GHz±75MHz |
Microwave power | <0.3mW |
Detection angle | 30°-150° |
Mounting height | 2.5-6 meters/6.56-19.68 feet(Ceiling Mounted) |
Detection range | Radius,2-6 meters/6.56-19.68 feet(Ceiling Mounted) |
Motion detection | 0.5~1.5m/s |
Operating temperature | -20°C+60°C |
IP rating | IP20 |
Warranty | 5 years |
ON/OFF Control Dtection area Remote Control
Hold Time Daylight Threshold warranty 5 years
Detection Range
This figure indicates the maximum distance at the highest mounting
height with 100% sensitivity.
Typical installation height 2.5-6 meters.
Mechanical structure
With remote controller can be set all parameters precisely.
With four poles to easily connect with LED driver and power supply
With two installation hole, easily fixed to the lighting fixture
for end user.
Wiring diagram
Dimensions (mm)
The compact design is very suitable for Tri-Proof lights.
Application Demo
1. Automatically ON/OFF function:
Light on when detect movement and off after people leave at night.
Applications: Corridor, Staircase.
With sufficient daylight, With insufficient daylight, After the
last detection and
even when motion detected, when motion detected, light ON. the
present hold time
light remains OFF. elapsed, light OFF.
2. No daylight function
The daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after
hold time.
Applications: Dim places such as Basement Parking, Underpass.
When motion is detected, After people leave the detection After the
last detection and
the sensor will switch on the area, light remains 100% the present
hold time
light to 100% brighteness. brightness within hold time. elapsed,
light OFF.
Installation Method:
User Notes:
1. Microwave can penetrate walls or glass thinner than 20cm and
attenuate if thicker than 20cm.
2. The driver voltage shall be stable and float within 10%.
3. Detection area will be affected by speed of motion, mounting
height and movement volume.
4. Conduct test on sunny days without the lampshade which will
affect the tested lux value.
Attention:
1. please press "Reset" first if you want to change any setting.
2. When press any button,the light will flicker,it means the
setting was recorded by sensor.
