ON/OFF Detector with Microwave Module 16M range with 6M Height
Daylight Function Sensor for Ceiling light/Tri-Proof light in
Office or Corridor
Features:
1. Movement detector to automatically control the light on/off with
microwave module.
2. Daylight function to intelligently control the light off even
detect movement when ambient daylight is sufficient.
3. Detection area, hold time and daylight sensor could be precisely
set by DIP switch.
4. Different choices of parameters to provide more options for
different situations.
5. Compact design and basic microwave motion sensor for widely used
on many structures of light like ceiling light, tri-proof light and
some linear light.
6. 4-pole pluggable clamp terminal (L,N,N,L') for 1.5mm² cable.
7. Operating voltage of 220-240VAC.
8. Built-in installation method to make the light more aesthetic
without exposing any part.
Specifications:
| Input | Operating Voltage | 220-240VAC 50/60Hz |
| Stand-by Power | ≤0.5W |
| Output | Switching Capacity | Max.400W |
Sensor Parameters | Hold Time | 5s/90s/5min/15min |
| Detection area | 10% / 50% / 75% / 100% |
| Daylight Threshold | 2Lux/10Lux/50Lux/Disable |
| Mounting Height | Max.6m(ceiling mounted); |
| Detection Range | Max.16m(ceiling mounted); |
Wireless Parameters | Operating Frequency | 5.8 GHz ±75 MHz |
| Switch Control | 0N/0FF |
Operating Environment | Operating Temperature | -20℃~+60℃ |
| Certificate | Certificate | TUV RED CE |
| Others | Wiring Method | 4-pole terminal (Input grey L. N. Output grey N. L’) |
| IP Rating | IP20 (Built-in) |
| Installation Size | 80.2*36.6*23mm |
| Packaging | Bubble bag +Outer Carton(K=A) |
| Life | 50000h |
ON/OFF Daylight sensor Detection area Hold Time 5 yearsWarranty
Wirng diagram:
4-pole pluggable clamp terminal(L,N,N,L’) for 1.5mm2 cable
Dimensions:
Small design & basic Micorwave Motion Sensor for easily
installation and widely using in the smart lighting control
industry.
Dip switch settings:
Detection area Hold-time Daylight threshold
Detection area means Hold time means the Daylight sensor priors
detection coverage. It time period the lights to motion sensor. Set
can be adjusted by will be ON after the threshold for specific
combining DIP last detection. needs. If disable, only
switches for specific motion sensor works.
application.
Function Demo:
1. Automatically ON/OFF function:
Light on when detect movement and off after people leave at night.
Applications: Corridor, Staircase.
With sufficient daylight, With insufficient daylight,when After last detection,the light will be
even when motion motion detected,light ON. dimmed down to the stand-by
detected, light remains OFF. dimming level after holdtime.
2. No Daylight Function
The daylight threshold is set to "Disable":
Light on when detect movement. After people leave, light off after
after hold on time.
Applications: Dim places such as Basement Parking,Underpass.
Installation Method
1. The detected surface cannot be shielded by metal objects.
2. Make sure the microwave module is completely exposed outside.
3. The detection surface of the sensor module shall be installed
facing the detection area.
Application:
Microwave can penetrate walls or glass thinner than 20cm and
attenuate if thicker than 20cm. It's very suitable for indoor
installation such as office, corridor etc.
