1. Extruder: 1 set
(1) Screw dia.: 90mm; Rotation speed: 0～100rpm,
(2) L:D: 30:1; Material of screw: 38CrMoALA;
The screw is special design for PET bottle flakes.
(3) Pressure automatic feedback system can adjust the screw speed
automatically.
(4) Melt filter: Double position melt filter changer.
(5) Spinneret device: 2 sets
(6) Metering pump:2 sets
(7) Heater: Electric heating ring to make sure the temperature
evenly.
(8) Double color dosing system: 1 set
(9) Magnet base: 1 set
2. Cooling Water Tank:1 set
(1) The tank is made by Stainless Steel 304.
(2) The height of tank is adjustable and the horizontal pushing
structure is conveniently to disassembly the spinneret.
(3) Use big window with double spotlight.
3. Seven roller Stretching unit A,
(1) Seven pieces variable diameter roller with hard chrome plating.
(2) Steel cabinet with accurately grind gear makes the roller run
smoothly.
(3) Built-out oil lubrication system which makes the gears run
steady.
4. Hot water Tank:1 set
(1) Heating power: 50KW; Electrical heating, the heating pipe are
in the tank.
(2) Material is stainless steel 304 with heat preservation.
(3) Equip two pressing roller for yarn.
5. Seven rollers stretching unit B: 0-180m
(1) Seven pieces variable diameter roller with hard chrome plating.
(2) Steel cabinet with accurately grind gear makes the roller run
smoothly.
(3) Built-in oil lubrication system which makes the gears run
steady.
6. Spindle winder
(1) Cops winder or spool winder.
(2) Winding bobbin: inner diameter 38mm× L 280mm
(3) To-and-fro motor power: inverter control
7. Running capacity: 120 KW
