1. Extruder: 1 set
(1) Screw dia.: 90mm; Rotation speed: 0～872rpm,
(2) L:D: 30:1; Material of screw: 38CrMoALA; The screw is special
design for PET recycle
(4) Pressure feedback system which can adjust the screw speed
automatically
(5) 50cc Metering pump:1 set
(6) Nozzle: 2 pieces with the disassembly support
2. Quenching Tank:1 set
(1) The tank is made by Stainless Steel 316.
3. Seven roller Stretching unit A,
(1) Roller size: φ270×750×7,
(2) Power of motor: 5.5KW
(3) Driving motor and reducer is from Zhejiang Tongli Reducer Co.,
Ltd.
4. Hot water Tank:1 set
(1) Size (L×W×H) : 4000×800×1100 mm
(2) Heating power: 35KW; Electrical heating, the heating pipe are
in the tank.
(3) Material is stainless steel 304 with heat preservation.
(4) Equip brush for water removal.
(5) Equip one moisture absorption device: 4KW
6. Seven rollers stretching unit B: 0-160m
(1) Roller size: φ270×750×7,
(2) Power of motor: 15KW
(3) Driving motor and reducer is from Zhejiang Tongli Reducer Co.,
Ltd.
7. Single layers hot blast stretching oven: 1 set
(1) Fan power: 2.2KW×2 sets.
(2) Heating power: 23KW
(3) Oven length: 4300 mm
(4) Special design of hot air channel which make the temperature
evenly.
8. Seven rollers stretching unit C: 0-180m
(1) Roller size: φ270×750×7
(2) Power of motor: 15KW
(3) Driving motor and reducer is from Zhejiang Tongli Reducer Co.,
Ltd.
9. Single layers hot blast setting oven: 1 set
(1) Fan power: 2.2KW×2 sets,
(2) Heating power: 23KW
(3) Oven length: 5000 mm
(4) Special design of hot air channel which make the temperature
evenly.
10. Seven rollers stretching unit D
(1) Roller size: φ270×750×7
(2) Power of motor: 5.5KW
(3) Driving motor and reducer is from Zhejiang Tongli Reducer Co.,
Ltd.
11. Lubricating system: 1 set
(1) Motor and reducer are from Taiwan CPG
12. Waster yarn collectors: 1 set
(1) Torque motor power: 80KG.cm
13. Winding collector:66 spindles
total capacity: 260KW,
total dimension: 40×2.6×3m,
Specification:
| Screw diameter | Φ90 |
| Raw material | PET recycle | Filament size | 0.4-1.0mm |
| Capacity | 150Kg/H | Filament shape | round |
| Screw L:D | 30:1 | Stretching unit | 4 sets |
| Screw material | 38CrMoALA | Winder | 66 spindles |
| Max linear speed | 160m/min | Instillation power | 260Kw |
| Nozzle holes | 60 holes | Overall size | 40×2.6×3m |
Picture:
