0.12-0.3mm HDPE Monofilament Extruder Machine For Green Nets
Product Description:
1.80×33 Extruder: 1 set
(1) Screw diameter: 80mm, Rotation speed of screw: 0～72 rpm.
(2) L:D: 33:1, Material of screw: 38CrMoALA; The screw is suitable
for HDPE chips.
(3) Automatic screen changer:1 set
(4) Pressure feedback system which can adjust the screw speed
automatically
(5) Material of barrel heater: Far infarad
(6) Electric heating round spinneret: 1 set
(7) Ceramic heating rings for spinneret with SS insulating layer
make the heat evenly.
(8) Spinneret components: 2 sets with disassembly support for
spinneret discreteness
(9) Metering pump, rotation speed: 0-40 rotation. Frequency control
of metering pump speed, driving power: 4KW.
2.Quenching tank: 1 set
(1) The tank is made by SS 304.
(2) Material of distributing roller: stainless steel
3. First Seven roller stretching unit
(1)Seven viable diameter rollers, there are five rollers are
covered with rubber to resist skidding.
(2) Steel structure box with accurately grind gear makes the
rollers run smoothly.
(3) Built-out oil lubrication system which makes the gears runs
steady.
4.Hot water tank:1 set
(1) Heating power: 27kw, two zones heater.
(2) Double pressure rollers with twin cylinder opening system which
is controlled by electromagnetic valve.
(3) Water suction.
5. Second Seven roller stretching unit
(1) Seven variable diameter rollers with hard chrome plating.
(2) Steel structure box with accurately grind gear makes the
rollers run smoothly.
(3) Built-in oil lubrication system which makes the gears runs
steady.
6. Single layer hot blast annealing oven: 1 set
(1) Fan power: 2.2KW×2 sets
(2) Heating power: 23KW
(3) Oven length: 5000 mm
(4) Special design of hot air channel which make the temperature
evenly.
7.Third Seven roller stretching unit.
(1) Seven variable diameter rollers with hard chrome plating.
(2) Steel structure box with accurately grind gear makes the
rollers run smoothly.
(3) Built-in oil lubrication system which makes the gears runs
steady.
8. Warping winder: 4 sets, 8 spindles
1) The beam size is according to customer’s requirements.
2) Motor: 150kg torque motor
Total installation power: 180KW
Overall size: 40000×1800×2500mm
Total weight: 20T
Parameter:
| Screw diameter | Φ80mm |
| Raw material | HDPE | Filament size | 0.12-0.3mm |
| Capacity | 80Kg/H | Filament shape | round |
| Screw L:D | 33:1 | Stretching unit | 3 sets |
| Screw material | 38CrMoALA | Winder | 8 spindles |
| Max linear speed | 160m/min | Instillation power | 180Kw |
| Nozzle holes | 300-400 holes | Overall size | 39×2.89×2.9m |
Pictures:
