30V 48VDC Output Interior Motion Detector For Linear Batten Light
36W LED Driver Sensor 1 - 10V Dimming Detector For Linear / Batten
Light
HT36V-I is Isolated Solution LED Driver & Microwave Sensor
Integrated Product with 23-36W Output Power and 30-54V Output
Voltage with 1-10V Dimming Detector Suitable for Linear/Batten
Light.
Features:
1. Operating Voltage of 120-240VAC
2. Output Voltage 30-54V; Output Current 0.75A±5% Max.
3. Max. output Power 36W and input power 42W Max.
4. Isolated LED Driver Solution
5. Detached design suitable for batten light and tri-proof light.
6. Remote control setting parameters
7. Detection Range*Height: 14m x 6m
8. Efficiency of 87%
9. Empty Load Voltage of 70V
10. IP20, 3 years warranty
Specification
| Output | Output LED power | 23-36W |
| Output LED current | Max. 0.75A±5% |
| Output LED voltage | 30-48VDC |
| Sensor Parameters | Hold time | 5s/30s/1min/3mib/5min/10min/20min/30min |
| Daylight threshold | 2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/Disable |
| Stand-by period | 0s/10s/30s/1min/5min/10min/30min/+∞ |
| Stand-by dimming level | 10%/20%/30%/50% |
| Power factor | ≥0.9 |
| Efficiency | 87% (Max.) |
| Detection area | 25%/50%/75%/100% |
| Detection angle | 30°-150° |
| Mounting height | Max.6m/19.68ft |
| Detection range | Max.ø14m/45.92ft |
| Empty load voltage | ≤70V DC |
| Input | Input voltage | 120~240VAC 50/60Hz |
| Input current | 0.36-0.16A Max |
| Input power | Max. 42W |
| Microwave frequency | 5.8GHz±75MHz |
| Microwave power | <0.3mW |
| Others | Operating temperature | Ta:- 20°C~50°C Tc: 85°C |
| Abnormal protection | SCP:Auto recovery,OVP,OCP,OTP |
| EMC standard | EN55015 |
| Safety standard | EN61347-1 EN61347-2-13 EN60598-1 |
| IP rating | IP20 |
| Life time | 50,000 hours |
| Installation | Installed inside lamps |
| Package requirement | Bubble pack, paper flat, outer carton |
Wiring diagram
Mechanical structure(mm)
- With detached microwave module, it could be installed inside of
the lighting fixture;
- With IR Receiver, it could be set by remote control
- With a pluggable interface to connect the driver and sensor
easily
Dimension(Unit: mm)
Detection coverage
This figure indicates the maximum distance at the highest mounting
height with 100% sensitivity.
Typical installation height 2.5-6m
Application Demo
1. Automatically ON/OFF function:
Light on when detect movement and off after people leave at night.
Applications: Corridor, Staircase.
The daylight threshold is set to "2lux,10lux,50lux"
With sufficient daylight, With insufficient daylight, After the
last detection and
even when motion detected, when motion detected, light ON. the
present hold time
light remains OFF. elapsed, light OFF.
2. No daylight function
The daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after
stand-by period.
Applications: Dim places such as Basement Parking, Underpass.
When motion is detected, After people leave the detection After the
last detection and
the sensor will switch on the area, light remains 100% the present
hold time
light to 100% brighteness. brightness within hold time. elapsed,
light OFF.
3. Function Demo - Dimmable control/Corridor function
With sufficient daylight, With insufficient After last detection,
After the stand-by
even when motion daylight, when motion light will be dimmed period,
light OFF.
detected, light remains detected, light ON. down to the stand-by
OFF. dimming level (10% or
30%) after holdtime.
HT36V-I.pdf
