IP20 Detached DALI Multi Sensor On Off Switch 50000 Hours Life Time
Detached DALI Motion Sensor IP20 Built In Dimmable Sensor 50000
Hours Life Time
HDD02 - DALI Sensor with Detached Design and Voltage of 120-277VAC
IP20 Built-in Installation Dimmable Sensor with Mounting Height of
6M x 12M Detection range Which could Match DALI Driver.
Features:
1. Detached small module to be installed inside of the lighting.
2. Wide range Voltage of 120-277VAC with dimming function.
3. DALI Driver matching.
4. Height (6M) x Range (12M)
5. IP20, CE certificate.
Detailed Product Description
| Operating voltage | 120-277VAC, 50Hz/60Hz |
| Switching capacity | Max,3.0A@120Vac,50/60Hz; Max,2.0A@277Vac,50/60Hz |
| Stand-by power | ≤1W |
| Detection area | 50%/100% |
| Hold time | 5s/30s/1min/10min |
| Daylight threshold | 2Lux / 10Lux / 50Lux / Disable |
| Microwave frequency | 5.8GHz±75MHz |
| Stand-by Period | 0s/30s/20min/+∞ |
| Mounting height | Max.6m |
| Detection range | Max.ø12m |
| Stand-by Dimming Level | 10%, 20%, 30%, 50% |
| Operating temperature | -20°C~+60°C |
| IP rating | IP20 |
| Detection angle | 30°~150° |
| Motion detection | 0.5~1.5m/s |
| Life time | 50,000 hours |
| Warranty | 5 years |
Wiring diagram
With clear indication for the DALI± and LED± terminal to be
connected with DALI driver and power supply seperately.
Mechanical structure and Installation(mm)
Dimension(mm)
Note: Motion sensor setting and dimming setting please refer to
remote control HD03R. HD02VR Wire diameter 4mm,Standard Version
Cable Length 485±10mm(can be customized).
Detection coverage
This figure indicates the maximum distance at the highest mounting
height with 100% sensitivity.
Typical installation height 8m.
DIP Switch Settings
Detection area Hold Time Daylight threshold Stand-by Period
Stand-by
In this area, The period of Definition of the The period of light
dimming level
movement will light keeping ambient brightness; keeping low output
The definition of
be detected 100% brightness only when the before it's low output in
the
and able to after moving ambient brightness is completely standby
period.
trigger the objects leave the lower than the preset switched off.
When
sensor. 100% detection area. specific lux amount, it's preset as"∞"
detection area the sensor will work; the light always
is also known when it's preset as keep at low output
as the strong "disable", the sensor if no movement in
sensitvity. works everytime it the detection area
detects motion and doesn't turn
regardless the off.
ambient brightness.
Application Function Demo
1. Automatically ON/OFF function:
Light on when detect movement and off after people leave at night.
Applications: Corridor, Staircase.
2. No daylight detection function:
The daylight threshold is set to "Disable".
Light on when detect movement. After people leave, Light off after
stand-by period.
Applications: Dim places such as Basement Parking, Underpass.
3. Function Demo - Dimmable control / Corridor Function:
Four Installation Methods & Instructions
Application
1. Microwave sensor can be installed in any lamp except the one
with full metal shell.
2. The detected surface cannot be shielded by metal objects.
3. Make sure the microwave module is completely exposed outside.
4. The detection surface of the sensor module shall be installed
facing the detection area.
HDD02.pdf
