(1) Main motor power: 18.5KW;
(2) Screw diameter: 70mm;
(3) L:D: 33:1; Material of screw: 38CrMoALA
(4) Metering pump:2 sets, Nozzles: 2 sets
(5) Static mixer: 1 set
2. Quenching tank: 1 set
3. Seven roller stretching unit A: 1 Set
(1) Steel roller size: φ270×700×7.
4. Hot water tank: 1 set
(1) Tank length:4000mm
(2) Heating method: by copper heating pipe
5. Water removal system: 1 set
6. Seven roller stretching unit B: 1 Set
(1) Steel roller size: φ350×700×7.
(2) The stretching unit is covered with stainless steel 304
7. Waster yarn collector system: 1 set
8. Air texturing machines: 24 ends
Each end:
(1) Gas heating barrel:1 sets
(2) Main conveying pipe:1 set,
(3) Heating roller and drive: 2 sets
(4) Tension roller: 2 sets
9. Conveyer device: 6 sets, 4 in 1 unit.
10. Automatic tension feedback winder: 24 spindles
Parameter:
| Screw diameter | Φ70mm |
| Raw material | Nylon | Filament size | 6400Dtex |
| Capacity | 150Kg/H | Pattern | Curly |
| Screw L:D | 30:1 | Stretching unit | 2 sets |
| Screw material | 38CrMoALA | Winder | 24 spindles |
| Max linear speed | 250m/min | Instillation power | 460Kw |
| Texturing | By air | Overall size | 45×2.8×2.8m |
Pictures:
