(1) Screw dia.: 50mm;
(2) L:D: 30:1; The screw is special design for PBT.
(3) Reducer from Jiangyin Gearbox.
(4) Pressure automatic feedback system.
(5) Pressure sensor from Shanghai
(6) 20cc Melt pump:1 set
(7) Motor of melt pump: 3.7kw
(8) Heater: Electric heating ring.
(9) Spinneret device: 1 Set
2. Quenching Tank:1 set
(1) Stainless Steel 304 tank
3. Seven roller Stretching unit A: 1 set
(1) Roller size: φ270×750×7,
(2) Power of motor: 7.5KW
(3) Steel cabinet with accurately grind gear.
(4) One pressing roller.
(5) The center height is 1100mm
4. Hot Water Tank:1 set
(1) Size (L×W×H) : 4000×800×1100 mm
(2) Heating power: 35KW;
(3) Water removal system: 4KW
5. Seven rollers stretching unit B: 0-160m
(1) Roller size: φ270×750×7,
(2) Power of motor: 15KW
(3) Steel cabinet with accurately grind gear.
(4) Reducer is from Zhejiang Tongli.
(5) The center height is 1100m
6. Hot Air oven: 3 sets
(1) Fan power: 2.2KW×2 sets.
(2) Heating power: 23KW
(3) Oven length: 4300 mm
7. Seven rollers stretching unit C: 1 set
(1) Roller size: φ270×750×7
(2) Power of motor: 15KW
(3) Steel cabinet with accurately grind gear.
(4) Reducer is from Zhejiang Tongli.
(5) One pressing roller.
(6) The center height is 1100m
8. Winding collector: 2 spindles
Specification:
| Screw diameter | Φ80mm |
| Raw material | Polyester | Filament size | 4" |
| Capacity | 80Kg/H | Filament shape | round |
| Screw L:D | 30:1 | Stretching unit | 3 sets |
| Screw material | 38CrMoALA | Winder | 2 spindles |
| Max linear speed | 80m/min | Instillation power | 350Kw |
| Nozzle holes | 400 holes | Overall size | 40×2.6×2.8m |
Picture:
