CNC Stone Saw Machine
Main Application
Drilling, Milling, Internal and External grinding and polishing,
Writing, Shaped Notching, Engraving on glass
Mechanic Structure
1.The machine tool and beam adopt welded steel structure. With
special heat treatment, the structure is firm and can work for a
long time.
2.The machine uses automobile paint which is more rust-resistant.
3.Total weight: about 7 tons (including peripheral accessories and
electric cabinet).
Mechanic Transmission
The machine is transmitted through AC servo motor by synchronic
belt and synchronic belt wheel driven spindle. There is automatic
lubricating system for the screw nut and guide-rail slider of the
transmitting parts.
Servo System
It adopts Mitsubishi/Hitachi AC servo system
Screw: all the screws are from KGF series double nut screw (German
NEFF)
Worktable
1.There is a multi-location worktable of large size in front of the
machine. With function of automatic rubdown of high precision,
users can adjust the flatness of the worktable when needed. This is
to keep a flat worktable.
2.There are positioning blocks for the work piece and vacuum
system.
3.There is a tool library with 2 x 5 tools. There is a tool library
with 5 tools at both left and right side of the machine. Users can
select different tools and optimize route according to processing
requirements.
Parts of Main Spindle
1.Motor of the main spindle: it adopts asynchronous speed-adjust
sensor motor of high efficiency. Adjusting range of rotating speed:
0 – 9000.
2.The machine equips 10 pieces of IOS 40 handles. The cone part
adopts 7:24 international uniform standard which is easy to be
changed. Grinding wheel with outer diameter 170 mm can be used.
Electric Cabinet
The distributing of electric cabinet can be designed according to
customer’s requirements. Each terminal is clearly marked. This is
convenient for the maintenance in the future.
Drawing Software
With Auto CAD software, user can design any geometrical pattern on
PC with mouse and keyboard.
Typesetting System
With combination of CNC engraving system, user can set the variable
parameter of processing pattern and then it will generate G code
automatically.
Safety and Reliability of Operation
1.The moving parts are lubricated by automatic lubricating system.
2. Electric cabinet adopts IP54 industrial standard and equips
air-conditioner.
3.The electric parts inside electric cabinet are common products in
the market which is easily changed.
4.The main fault will be automatically reminded.
Central Lubricating System
It adopts PDI lubricating system of American BIJUR – DELIMON which
can timely lubricate the transmitting parts by separate setting to
PLC.
Configure of Machine
Possibility of using various shaped tools, drills, millers,
polishers etc. with 20 positions.
Dust-proof and water-proof on three axis,protect the whole
transmission system.
Crossbeam and carling adopt Taiwan's Hiwin linear guide to move,
which ensure high precision of cutting and long life.
High speed and low noise.
High efficiency and low processing cost.
Handle: 10 pieces of IOS 40 handles (it equips 10 pieces of
grinding wheels. Amount can be changed according to customer’s
requirement).
Motor of main spindle: 6 KW
Vacuum pump: vacuum for sucking raw glass
Placing of electric cabinet: length-ways/transverse; length-ways
Main technical data
| Transverse | axis X: X = 3000 mm |
| Length ways | axis Y: Y = 2000 mm |
| Vertical | axis Z: Z = 450 mm |
| Allocating accuracy(X,Y,Z) | 0.01*002*0.01 |
| Speed(X,Y) | 5m/minute |
Technical Parameter of CS Motor Grease Pump
| Voltage of motor | 220V |
| Max. working pressure | 25Mpa |
| Oil-draining of single outlet | 3~5.5ml/second |
| Quantity of outlet | 1-3 |
| Power of motor | 60W |
| Available Grease | NLGI 000#~2# |
| Cubage of oil tank | 2L |
| System | progressive PRG |
