Flange-to-flange Compression Type Load Cell 200kg Column
Compression Load Cell 500kg
Flange Type Compression Load Cell FFA is made of stainless steel
utilizing strain gauge technology to deliver mV/V output with
maximum 0.1% non-linearity of the full scale.Tension Compression
Force Sensor FFA offers 0-20kg / 0-50kg / 0-100kg / 0-200kg /
0-500kg / 0-1000kg / 0-2000kg seven rated measuring ranges to
choose from, flange mounted force transducer FFA can be used for
both tension and compression force measurement. Stainless steel
construction, flange design, compact size, bidirectional force
measurement, high accuracy, Cylindrical Load Cell FFA offers a perfect force measuring solution for
applications such as wire tension control, force distribution
analysis, automated control, cylinder thrust measurement, assembly
force monitoring, spring testing, ultrasonic welding clamp force
control, hand press force verification,and so on. In addition to
the standard specifications, Forsentek is also capable of and
willing to provide custom design service to meet requirements of
different applications.
Dimensions(Unit in "mm")
| Ordering code | Measurement Range | Force direction |
| FFA-200N | 0-200N / 0-20kg | Tension/compression |
| FFA-500N | 0-500N / 0-50kg |
| FFA-1kN | 0-1000N / 0-100kg |
| FFA-2kN | 0-2000N / 0-200kg |
| FFA-5kN | 0-5000N / 0-500kg |
| FFA-10kN | 0-10kN / 0-1000kg |
| FFA-20kN | 0-20kN / 0-2000kg |
Specifications
| Capacity | 200N / 20kg / 44 lbf
500N / 50kg / 110 lb
1000N / 100kg / 220 lbf 2000N / 200kg / 440 lb
5000N / 500kg / 1.1 klb
10kN / 1000kg / 2.2 klb 20kN / 2000kg / 4.4 klb |
| Rated output | 2.0 mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.1% of full capacity |
| Hysteresis | ±0.1% of full capacity |
| Nonrepeatability | ±0.05% of full capacity |
| Creep(5min) | ±0.05% of full capacity |
| Safe overload | 150% of full capacity |
| Ultimate overload | 200% of full capacity |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.02% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 385±30 ohms |
| Output resistance | 350±10 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP62 |
| Material of element | Stainless steel |
| Cable | Ø3*3000mm 4-core shielded |
| Wiring code | Red--Power input+ Black--Power input- Green--Signal output+ White--Signal output- |
Brief instruction of Rated output(or Sensitivity):
Definition: The signal produced by load cell(or force transducer)
when rated load is applied, expressed in terms of mV/V. The rated
output indicates the output signal range of a sensor.
Sensor output = (Power supply * Rated output) * Load / Capacity
Rated output of column load cell FFA is normally around 2.0mV/V.
Power supply of cylindrical load cell FFA is normally within 3-15V.
Load / Capacity is within 0-1.
So the output range of flange force sensor FFA is normally within
0-30mV(-30mV...+30mV for tension and compression force
measurement).
Example one: Tension Compression Load Cell FFA-200kg with 2.0mV/V
sensitivity powered by 10V DC,the output range is -20mV...+20mV.
Example two: Tension and Compression Load Cell FFA-500kg with 2.0mV/V
sensitivity powered by 5V DC,the output range is -10mV...+10mV.
A load cell amplifier can be used to deliver -5~5V, 0-10V or 4-20mA
output. Example: Cylindrical compression load cell FFA-200kg
working with -10-10V amplifier,the Force-Voltage relationship will
be 0-200kg compression load VS 0-10V output, 0-200kg tension load
VS 0-(-10V) output which is linear. When you get 5V output,it means
the current load is 100kg compression force,when you get -3V
output,it means the current load is 60kg tension load,and so on.
Flange-to-flange Compression Type Load Cell 500kg Column
Compression Load Cell 200kg
Click here to download
datasheet
