Miniature Tension Compression Load Cell 2lb 4lb 10lb 20lb 45lb
Micro S Type Load Cell
Miniature S Type Load Cell FSSQ offers a compact design for a
variety of applications. the S Beam Load Cell series provides
accuracy, compact design features, and 5 capacity ranges 2.2lb /
4.4lb / 11lb / 22lb / 45lb to choose from.The jr s-beam load cell
FSSQ utilizes metal foil strain gauge technology to deliver 2.0mV/V
output with maximum 0.2% non-linearity,the compact design enables
the FSSQ to be easily embedded into machinery or test equipment –
ideal for packaging machinery, assembly machinery or end-of-line
test equipment.The Micro S-Beam Force Transducer FSSQ features M2
threaded holes on two sides for the mounting of attachments or
implements for both tension and compression force measurement in
applications with limited space.
Dimensions(unit in "mm")
| Ordering code | Measurement Range | Force direction |
| FSSQ-10N | 0-10N / 0-2.2lb | Tension/Compression |
| FSSQ-20N | 0-20N / 0-4.4 lb |
| FSSQ--50N | 0-50N / 0-11 lb |
| FSSQ-100N | 0-100N / 0-22lb |
| FSSQ-200N | 0-200N / 0-45lb |
| Capacity | 10N / 1kg / 2.2 lbf
20N / 2kg / 4.4 lbf
50N / 5kg / 11 lb
100N / 10kg / 22 lbf
200N / 20kg / 45 lbf |
| Rated output | 2.0mV/V |
| Excitation | 3-12V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.2% of full capacity |
| Hysteresis | ±0.2% of full capacity |
| Nonrepeatability | ±0.1% of full capacity |
| Creep(5min) | ±0.1% of full capacity |
| Safe overload | 150% of full capacity |
| Ultimate overload | 200% of full capacity |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.03% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 380±30 ohms |
| Output resistance | 352±3 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP62 |
| Material of element | Stainless steel |
| Cable | Ø2*3000mm 4-core shielded |
| Wiring code | Compression@
Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A Force Sensor is a transducer that converts mechanical load into
mV signal proportional to the applied force.The acting force causes
deformation of the measuring element,the bonded strain gage deforms
accordingly which will cause the resistance change of the
wheatstone bridge,under constant power supply, the output signal
between Sig+ and Sig- will change proportionally,thus the
load/force can be measured by measuring the output signal from the
transducer.
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of S-beam load cell FSSQ is around 2.0mV/V.
Power supply of S type force sensor FSSQ is normally within 3-12V.
Load / Capacity is within 0-1.
So the output range of S beam force transducer FSSQ is normally
within -24mV...+24mV for tension and compression force measurement.
A load cell amplifier can be used to convert mV signal into -5-5V /
0-10V / 4-20mA for easy signal processing,taking FSSQ-50N and
FSC(-5-5V)-24V for example,the load-voltage relationship will be
0-50N compression load VS 0-5V output, 0-50N tension load VS
0-(-5V) output, 5V voltage corresponds to 50N compression load, -1V
voltage corresponds to 10N tension force,and so on.
Micro Tension Compression Load Cell 2lb 4lb 10lb 20lb 45lb
Miniature S Beam Force Sensor
Click here to download datasheet
