Extruded Aluminum Profiles For Windows Porcelain Anodized Aluminium
Extrusion 6063
Introduction of Porcelain Aluminum Profiles:
New surface porcelain swim production and porcelain swim itself
performance First, the production of high—end surface porcelain
swinuning materials, exquisite production process: 1, the aluminum
bar is required from the melted rod. The extrusion speed is 49%
slower than the conventional material, 3. The surface of the
extruded blank is required to be high, no obvious mechanical lines,
mold lines, geometric dimensions above high precision, and the
plane clearance is controlled within 0.3% of sur high precision. 4.
The surface requirements should not be scratched, and there should
be a space between each material, arxl the operation should be
handled gently. 5 strict production technology, high requirements
for process temperature, tank liquid control and skilled operators
in the production process
Product Details:
| Description | Extruded Aluminum Profiles For Windows Porcelain Anodized Aluminium
Extrusion 6063 |
| Material Thickness(t) | t=0.8-2.0 mm |
| Materiral | Aluminum Alloy 6063 |
| Annealing Treatment | T3-T8 |
| Color | Champagne, Silver White ,Bronze, Grey, Black, (RAL series)etc. |
| Surface Treatment | electrophoresis, anodized, wood grain, polished and etc |
| Shape | Break Bridge,T Shape,Square, Round, Flat, Oval, and according to
customer's drawing. |
| Length | Normal length=6m or in customer's order |
| Usage | Building, Production Line, Decoration, Industrial, Transportation,
Door and window, etc. |
| Package | 1. Pearl cotton foam for each profile; 2. Wrap with shrink film exterior; 3. Packed according to customer request. |
| Advantages/Features | Providing colorful products with various mechanical performances to adapt all kinds of architectural styles |
Introduction of Electrophoresis:
Aluminum or aluminum alloy products are used as anodes in
electrolyte solution, and the process of forming aluminum oxide
film on the surface of the aluminum and aluminum alloy is called
anodic oxidation treatment of aluminum and aluminum alloy. After
anodization, the surface of aluminum can produce several microns -
hundreds of microns of oxide film. Compared with the natural oxide
film of aluminum alloy, its corrosion resistance, wear resistance
and decoration have been obviously improved and improved.
- The aluminum oxide film is a porous membrane. Whether it is
coloured or not, it must be closed before being put into use, so as
to improve its corrosion resistance and weatherability. There are
three kinds of treatment methods, namely, high temperature
hydration reaction closed, inorganic salt closure and organic
matter closure.
(1) High temperature water sealing.
This method utilizes the hydration reaction of aluminum oxide film
and water to turn the amorphous membrane into a hydrated
crystalline membrane.
The hydration reaction can be carried out at both normal and high
temperatures, but at high temperatures, especially at the boiling
point, the hydrated crystalline membrane is a very stable and
irreversible crystalline film. Therefore, the most commonly used
aluminum oxide film is treated by boiling water or steam treatment.
(2) Sealing of inorganic salts.
Inorganic salt method can improve the fastness of organic coloring
dyes, so it is often used in chemical coloring.
(3) Organic sealing method.
This is the soaking, soaking or coating of the aluminum oxide film.
Because of the high cost and the increase of the process flow, it
is not easy to use, more or more of the two kinds of methods
mentioned above, and the first kind of high temperature hydration
is the mainstream.
Aluminum Frame Windows Fetures:
The sliding window has the advantages of simplicity and beauty,
large window width, large glass block, wide field of vision, high
daylighting rate, convenient glass cleaning, flexible use, safety
and reliability, long service life, opening in one plane, less
occupied space, convenient installation of screen window, etc.
Sliding windows are the most widely used by consumers. The
disadvantage is that the two windows cannot be opened at the same
time, but only half can be opened at most, and the ventilation is
relatively poor; Sometimes the sealing performance is also slightly
poor. Sliding window: it can be divided into left and right, up and
down. The sliding window has the advantages of not occupying indoor
space, beautiful appearance, economical price and good sealing. It
adopts high-grade slide rail, which can be opened flexibly with a
slight push. With large pieces of glass, it can not only increase
the indoor lighting, but also improve the overall shape of the
building. The stress state of the window sash is good and not easy
to be damaged, but the ventilation area is limited to a certain
extent.
Photos:
Please tell us the information below, and we will give the best
suggestion to you !
1. Where you intend to use the aluminium profiles?
2. If you have the estrusion drawing, send us and we develop the
correspondence mold.
3. Which color you want or tell us the architectural style you
like.
4. Purchase quantity. It will convenient us to give you the best
price.
