Ultrasonic Nebulizer For Spraying No Abrasion HS-N30khz High
Efficiency Stable Atomizer
Description:
Ultrasonic spraying is a unique spraying technology, which is a
spraying method based on ultrasonic atomizing nozzle technology.
The material to be sprayed is first in a liquid state, and the
liquid can be solution, sol, suspension, etc. The liquid coating is
first atomized into fine particles by an ultrasonic atomizing
device, and then uniformly coated on the surface of the substrate
by a certain amount of carrier gas. , thereby forming a coating or
film. Compared with traditional pneumatic two-fluid spraying,
ultrasonic atomizing spraying can achieve better uniformity,
thinner coating thickness and higher precision. At the same time,
since the ultrasonic nozzle can be atomized without air pressure
assistance, the use of ultrasonic spraying can significantly reduce
the splash of paint during the spraying process and achieve the
purpose of saving paint. The paint utilization rate of ultrasonic
spraying is 4 times that of traditional two-fluid spraying. above.
Applications:
Ultrasonic atomization spraying systems are now used in many
fields, especially in the fields of alternative energy and
nanomaterials, glass industry, medical treatment, printed circuit
boards, semiconductors, etc. Such as:
1. Ultrasonic fuel cell catalyst coating system
2. Thin film & perovskite solar cell coating system
3. Carbon nanotubes, nanowires and other nanomaterial coating
systems
4. Thin film functional glass coating system
5. Hard coating and other thin film protective glass coating
systems
Specification:
Frequency: 30KHz
Power: 100W
Atomization Speed:Max: 50L/H
Power Consumption: 0.01 Degrees/Kg
Atomization Volume: 39um
Spray Nozzle Shape: Long nozzle
Atomization Head Structure: Umbrella
Advantages:
1. A major breakthrough in spray technology, you can spray a
variety of liquids.
2. Low power consumption, the fog of great energy saving.
3. No plug, no abrasion, no noise, no pressure, no moving parts.
4. Can be any combination to meet the requirements of the spray
volume.
5. The use of high-performance titanium and stainless steel.
Detailed Images:
