Full Set Complete Automatic PET Plastic Small Bottle Drinking
Mineral Water Production Line
A. Filling valve use isobar machinery valve, High speed and big
flow, the high accuracy filling valve, filling speed fast, the
liquid level is stable.
B. Main drive adopt gear drive independent, high efficiency, small
noise, long life, maintenance-free, transducer can control the main
motor speed, the machine adopt Variable-frequency variable speed,
whole operations area , engine base is stainless steel contain
carbon steel
C. Guide bottle system, simple structure, according to bottle
style, can change
D. The whole machine can be controlled automatically by PLC
E. Filling hydraulic material liquid level height adopts liquid
level probe control, liquid level steady, filling reliable
F. The machine important parts and electrical elements is import
production
G. Filling hydraulic material can be controlled automatically and
have CIP washing connector.
--- Feature---
1. 304 Stainless steel construction , and the liquid contact parts
are 316L stainless steel.it is based on you.
2. Schneider PLC and touch screen control for you
3. Servo motor Driven, one servo motor drive one piston, high speed
and high accuracy.
4. No bottle ,no fill, automatic alarm for the warning.
5. The filling blocked nozzles are anti drops, silk, and auto cut
viscous liquid
6. Easy to maintain, no special tools are required.
7. Diving nozzles for bottom up filling of foaming products if need
8. Bottle mouth can be located if need
--- Inside Details Introduction---
Flat Conveyor.
This 5L / 10L bottle water filling machine combines disinfection
washing, filling and capping three functions into one assembly
line. Mainly used for liquid filling, it is moderate, simple
structure, easy maintenance.
Bottle Washing.
Contact Part Material :
Washing Heads SS 316 ,
Filling Heads SS 316 ,
Capping Heads SS 316 .
Other Machine Parts : SS 304
Bottle Filling.
1. 304/316 Stainless steel high precision filling nozzle
2. Filling volume adjustable in fine rank, same liquid level after
filling
3. All 304/316 stainless steel contact parts & liquid tank, fine
polish, no death corner, easy to clean
4. 304/316 stainless steel filling pump
5. Efficient spray nozzle rinse thoroughly and save water for
flushing
Bottle Capping.
Convenient adjustment: replacement filling specifications only in
touch screen can be changed in parameters, and all filling first
change in position, fine-tuning dose it in touch screen adjustment.
Light Check.
When close to target filling capacity can be applied to realize
speed slow filling, prevent the liquid spill bottle mouth cause
pollution.
Control.
1. PLC + Touch Screen
2. Filling machine parts has a photoelectric detection, when the
bottle is only through the Ba, the optical data into information to
the PLC, PLC had instructed the cylinder block to block bottles .
3. Accurate measurement: adopt servo control system, ensure the
piston can always reaches constant position.
---Technical Paraments---
| Number of heads | 12 Rinsing heads,12 Filling heads, 4 Capping heads | 8 Rinsing heads,8 Filling heads, 3 Capping heads |
| Applicable bottle size | PET bottle |
| Diameter | ф150-195 mm |
| Bottle height | 230～360mm |
| Rated Capacity | 1000-2000BPH@5L | 800-1000 BPH@5L |
| Cap Style | Plastic Screw Cap 40~55mm Neck for PET Small Bottles |
| Volume | 5Liter -10Liter |
| Timing Type | Transducer |
| Washing Drop dryer time | 3.4sec |
| Filling temperature | <40℃ |
| Compress air wastage | 0.8~1M3/hour | 0.6~0.8M3/hour |
| Pressure of washing | 0.25-0.3Mpa | 0.15-0.25Mpa |
| Pressure of filling | 0.15~0.35Mpa | 0.1~0.25Mpa |
| Main machine Power | 3.0KW | 2.0KW |
| Overall size | 3050*2050*2200mm | 2050*2050*2200mm |
| Weight | 3.5Kgs | 2.2Kgs |
