QGF-200 stainless steel 3 Gallon water line/machine/system for pure
water
Feature :
1. The 3-5 gallon pure water barrel filling machine integrates
bottle washer, filler and sealer into unit,
Multiple injections of washing and sterilizing and bleaching are
used in bottle.water filling machine.
2. The sealer can seal bottle caps qutomatically.
Equipment list:
| | |
| Semi-auto de-capper and brush washer | BS-1 |
| Monoblock rinser-filler-capper with full SUS304 | QGF-200 |
| | / |
| | / |
| | / |
| Solid Ink Roll Coding Machine | FP-380F |
Principle:
The machine is integrated washing filling and capping together. It
is ideal machine to produce barrel water. The whole machine is
using stainless steel 304 ,rot resistant,can be cleaned easily.Main
electric parts are all branded. Air channel system use Air TAC
brand product.The machine is with compact construction,will occupy
small room,working efficiency is high.Only need 2 operators to
control, is a good choice for factory to choose.
The machine set up do not need plug floor screw,after case taking
off,set the machine on the flat floor,and then adjust stand height
and adjust all stand pressure to be average. After the machine is
set up well, get in through water pipe, drain pipe and power , air
power.
Working process:
Barrel filling unit can be divided into 3 steps: washing, filling
and capping, total 9 working stations,working process as below:
(1) Set empty barrel mouth to barrel seat, empty barrel will be
washed during headstand situation,4 working station for barrel
inserting.
(2) Washing process will be divided into 4 steps:1, hot alkali
water washing 2,thimerosal washing；3,clean water washing,4,pure
water washing.Every washing step is set to 8S,after washing,there
will be 10S for dripping.
(3) The barrel after washing will move down 45 degree through the
passing chain and will passing out chain and turn over 45 degree by
barrel lift cylinder to filling position for filling.
(4) Filling value will driven by cylinder to insert into barrel and
start to fill, filling time is controlled by PLC, and filling time
is adjustable by control panel according to filling liquid
surface.After filling, the extra water will back to pure water tank
by automatic vent,it can reduce water consumption.(water tank is
not included)
(5) After filling process finish,the filled barrel will be pushed
to capping position by barrel stop cylinder,the whole process
finish till now.
