Gr1 Gr2 Gr5 Gr7 Gr9 Titanium Reducer Titanium Pipe Fittings For Industry
Reducer is an indispensable part for connecting pipes of different sizes and diameters in pipeline equipment.Its
varieties have Concentric Reducer R(C) and Eccentric Reducer
R(E).When the flow of fluid in the pipeline changes, such as
increase or decrease, and the flow rate requirements do not change
much, reducing pipe should be used. At the inlet of the pump,
reducing pipes are needed to prevent cavitation.And meters, such as
flow meter, regulating valve joint, in order to match with the
meter joint, also need to use reducing pipe.
Processing method: The shrinkage forming process of the big head is to put the tube
blank equal to the diameter of the big end of the big head into the
forming die, and press the metal along the axial direction of the
tube blank to move along the cavity and shrink forming. According
to the size of reducing tube, it can be divided into one pressing
forming or multiple pressing forming.
Production process: push system, pressing, forging, casting and so on
Non-Destructive Tests:Ultrasonic test ,Radiographic Examination,PMI Test,Penetration
Test,Diamension Examination ,Surface Examination ,Hardness
Examination
Destructive Tests:Matallographic Examination ,Intergranular Corrosion Test,Grain
Size Test,Mechanical Property Test,Tension Test,Bending Test,Impact
Test.
Application :Widely used in natural gas, electric power, petroleum, chemical,
industrial, pharmaceutical, pressure pipeline and so on
| DN(Size) | 20*15mm-1150*1050mm |
| A (Outside Diameter )D1 | 26.9mm-1168mm |
| A (Outside Diameter )D2 | 21.3mm-1067mm |
| Length | 38mm-711mm |
| B(Outside Diameter )D1 | 25mm-1120mm |
| B(Outside Diameter )D2 | 18mm-920mm |
| Length | 38mm-711mm |
| Material | Titanium Gr1 Gr2 Gr5 Gr7 Gr9 |
| Standard | GB/T 27684 ASTM B363 ASTM B862 HG/T 20592 |
| Surface | Sand blast |
Tag:titanium concentric reducers,reducer pn16,Titanium eccentric
reducer factory
