Gr1,Gr2,Gr3,Gr4,GR5,Gr7,Gr9,Gr11 Socket welding flange ANSI
B16.5/ASTM B16.5
Titanium socket weld flange is a type of flange that is used to
connect pipes, valves, and other equipment to a piping system. It
is made of titanium, a strong and lightweight metal that is
resistant to corrosion, making it ideal for use in harsh
environments.
Socket weld flanges have a recessed area in the center, which is
used to insert the pipe or equipment being connected. The flange is
then welded to the pipe or equipment using a socket weld, which is
a type of weld where the pipe is inserted into the socket of the
flange and welded from the outside. This creates a strong,
leak-free connection between the two pieces of equipment.
products | SOCKET WELDING |
Material Grade | Gr1 Gr2 Gr3 Gr4 GR5 Gr7 Gr9 Gr11 |
Certification | ISO9001:2008 Alibaba.com Assessed Supplier |
Standard | ANSI B16.5 ASTM B16.5 ASME B16.47 JIS B2220 DIN2627-2628
AWWA ASTM A182 AND ASME SA182 |
size | 1/2"~ 60"NB NPS 1/2 - NPS 24 (DN 10 - 2000) |
Pressure Class | PN0.25~32Mpa |
(DIN) PN6 PN10 PN16 PN25 though PN250 |
150# 250# 300# 400# 500# 600# 900# 1500# 2500# |
Technique | Forged and CNC Machined |
type | Weldnecks Slip-Ons Threaded Blind Socketweld and Lap-Joint |
Flange surface | FF RF TG RJ MFM |
2. Relevant Parameters
Titanium ANSI Flange
The oil, gas, and petrochemical industries use many different types
of titanium flanges, with each type used in specific situations in
order to maximize the life of the flange, ease of installation, and
overall cost.
Weld neck flanges
The weld flange is the standard against which all other ANSI
flanges are measured when it comes to strength and wear life. Long
weld neck flanges are the standard because they are used for many
different high-pressure applications at a variety of extreme
temperatures and are designed to limit turbulence and erosion at
the joint.
Slip-On Flanges
In general, these flanges are rated at about two-thirds of the
strength of a standard long weld neck flange and they have a
fatigue life of about one-third of that of a comparable long-weld
neck flange. They are connected to pipes using two filet welds, one
at the outside of the flange and another at the inside of the
flange. This makes them a bit more time consuming to install on a
pipe, as well as reduces the versatility of the flange because
combining them with elbow and tees is not possible. All fittings
used with slip-on flanges must have a straight end.
Blind Flanges
Blind pipe flanges seal off pipes, valves, and ASME pressure vessel
openings while providing an option to expand the pipeline network
in the future. These flanges are also often used for high-pressure
testing within the pipeline network.
Socket Weld Flanges
Socket weld flanges are just about as strong as slip on flanges,
but are about 50% stronger when it comes to resisting fatigue.
These flanges are attached using a single fillet weld on the
outside of the flange. This makes them less labor intensive to
install.
Threaded Flanges
The best thing about threaded flanges is that they can be installed
into a pipe system without welding. These are used for smaller pipe
sizes most of the time and only for pipe systems that have thick
walls.
3. Type of flange
Titanium socket weld flanges are commonly used in applications
where high strength and corrosion resistance are required, such as
in the chemical, oil and gas, and marine industries. They are also
used in applications where weight is a concern, such as in
aerospace and automotive industries.
It is important to ensure that the titanium socket weld flange is
compatible with the materials being connected, and that the welding
process is performed correctly to prevent leaks and ensure a strong
connection.
Tag: Weldnecks Slip-Ons, Threaded Blind, Socketweld and Lap-Joint
