manual inflation packerfor grouting, Inflatable packer for
borehole, single packer, double packer
Inflatable packer for grouting
Inflatable seal packer features:
1. All materials of the hole packer are inflaming retarding and
antistatic and meet related national standards.
2. The high elasticity and tightness of rubber is utilized, so that
the hole packer is applicable to irregular holes and better sealing
performance can be realized especially in soft coal seams.
3. The rubber surface is processed by adopting special
technologies, so that excess water will be extracted and grout will
not flow out.
4. By using the hole packer's characteristics of high resistance to
pressure, it may be used to realize high-pressure grouting on coal
body, so that the grout can enter the gaps between coal seam and
thus ensure the quality of hole sealing.
5. The hole sealing length may be designed at will.
6. It is applicable to all types of coal seams, whether soft or
hard.
7. After boring is completed, the hole may be pre-sealed by using
water pressure in the mine and then sealed by injecting grout.
8. It is easy to operate and can complete the hole sealing
operation at one attempt.
Spec. & Model mm
|
Length mm
|
Outside Diameter mm
|
Applicable Aperture mm
|
Free-Expansion Outside Diameter mm
|
Working Pressure Mpa
|
Burst Pressure Mpa
|
Proof Pressure Mpa
|
| MDT-30/15 | L±5 | 30±1 | 32-37 | 40-50 | 15 | 16 | 8 |
| MDT-38/20 | L±5 | 38±1 | 40-55 | 58-68 | 20 | 16 | 8 |
| MDT-38/6 | L±5 | 38±1 | 40-50 | 60-75 | 6 | 24 | 12 |
| MDT-50/6 | L±5 | 50±1 | 55-70 | 70-85 | 6 | 24 | 12 |
| MDT-55/6 | L±5 | 55±1 | 60-80 | 90-105 | 6 | 20 | 10 |
| MDT-63/5 | L±5 | 63±1.5 | 65-95 | 95-110 | 5 | 16 | 8 |
| MDT-70/4 | L±5 | 70±1.5 | 75-115 | 105-120 | 4 | 16 | 8 |
| MDT-125/6 | L±5 | 125±2 | 130-180 | 200-230 | 6 | 16 | 8 |
