Semi Automatic Assembly Line, Busbar Reversal Production Equipment
1000V Manual Irregular Busbar Inspection Line For Insulation Test
1. The semi-automatic busbar production line can realize automatic
clamping from left to right and down to up which is convenient for
drilling and riveting.
2. The production line is flexibly compatible,suitable for busbar with width 74.5mm-350mm.
3. The electrical control system can clamp at the same time or
separately.
4. The semi-automatic busbar assembly line is a cost-effictive
production line and more stable which can decrease the NG rate and
labour cost and increase the working efficiency.
5. The clamping is powered by air compressor 5-8MPA, which only
comsumes the air when operation and is more environment-friendly
comparing with the electrical comsumption of oil pressure.
Feature
Customized
testing report can be saved, printed on site and recorded remotely.
Its format can be set according to customer’s requirements.
Fuction
HV withstanding test, insulation resistance test and grounding test
Function introduction
Manual Busbar Inspection Line is mainly used for inspecting short
straight busbar, elbow busbar, terminal busbar and etc.. It’s
composed of two parts: fixture positioning and main inspection
instruments. Fixture positioning part is operated manually while
inspection instruments will test the busbar and generate the report
automatically.
Equipment data on Manual busbar inspection line
| No. | Parameters |
| Model | KD-JCX/M-6 |
| Busbar Height | 100mm~650mm |
| Busbar Length | 500mm~3000mm |
| Suitable Busbar Type | Irregular busbar |
| Position Type | Unilateral |
Printing System | Bar code printing/ Report printing( optional) |
High Voltage Withstanding Test | 0~5000V |
| Insulation Test | 1~1000V |
| Grounding Test | 0~25A |
Power | 380~415VAC 50~60Hz 3kW |
Equipment Dimension | L6200mm*W800mm*H800mm |
FAQ
Q1: What’s the guarantee if we purchase from you?
A1: All the equipment ordered from us will provide one year
guarantee from the delivery date .If there is any wearing part be
broken within the warranty and isn’t caused by improperly operation
then we would offer the new parts for free.
Q2: How about the after service?
A2: There’s no problem we could send our engineer to install or fix
the machine locally in due course but customer need to pay the
visa, round air tickets cost and arrange the hotel accommodation
for our engineer.
