IMU50 MEMS Low-cost Inertial Measurement Unit High-precision Motion
State Attitude
Introduction:
IMU50 is a low-cost inertial measurement sensor, used for measuring
the angular velocity and acceleration of the moving carrier. It is
suitable for inertial attitude measurement in motion or vibration
state. It adopts MEMS accelerometers and gyroscopes with high
reliability, and the error source is greatly eliminated through
nonlinear compensation, temperature compensation, drift
compensation etc.,to ensure the high precision of products.
Performance Index:
| Gyro | Resolution | 0.01°/sec |
| Range | ±400°/sec |
| Bias stability at room temperature | ＜2°/h(100s,1σ) ＜150°/h(10s,1σ) |
| Angle random walk coefficient | ＜0.1 °/√h |
| Bias repeatability | ＜50 °/h(1σ) |
| Scale factor non-linearity | ≤100ppm(1σ) |
| Scale factor repeatability | ≤100ppm(1σ) |
| Bandwidth | 100Hz |
| Accelerometer | Range: X, Y, Z | 2g |
| Resolution | 0.01mg |
| Add zero offset | 0.15mg |
| Bias stability | 0.001mg(25℃,100s,1σ) 0.01mg(25℃,10s,1σ) |
Application:
● Dump truck
● Balance car
● Stable platform
● AGV unmanned guided vehicle
● ROV underwater robot navigation
● Marine survey
● Robots
● Unmanned aircrafts
BWSENSING's Accuracy Traceability System:
Company introduction
Wuxi Bewis Sensing Technology LLC(BWSENSING) is an innovative fast
growing company established in 2010. The company was born in The
Institute of Microelectronics (IME) of Peking University. We have
achieved the top spot in the middle and high-end industry
applications in the Chinese market.
From 2019, BWSENSING ® is approved as our global brand.With 10
years experience in the research-design-development and manufacture
of a range of Inertial sensor technology, BWSENSING posses the
skills, knowledge and experience to provide fully integrated
OEM/ODM design and manufacturing services for Inclinometer,
Electronic Compass, IMU, AHRS, GNSS/INS and Fiber Optic Gyroscope.
As the company co-founder Dr. Guangyi Shi said, we will use the
Accurate and Cost-effective sensors to make a greater contribution
to the global society for a better IoT world.
FAQ
Q1: Accuracy definition of products
A: RMS accuracy, the accuracy of each product can be
traced.Accuracy test report can be provided if required.
Q2: How to select suitable model?
A: Users should check the following points:
a. Single or dual axis?
b. Commom protocol, Modbus or CAN?
c. Dynamic or static Application scenarios?
d. Horizontal or vertical installation?
Q3: How to purchase?
A: If you want sample, please purchase on BWSENSING online shop. We
accept Paypal/TT/CC.If you purchase in bulk, it is recommended to
consult the sales for the best price.
Q4: How long is the warranty period?
A: One year.
