Suspension Clamp with Neoprene Insert for ADSS cables
Neoprene Inserted Suspension clamp named J hook suspension clamp /
Suspension clamp are designed to provide a suspension for 5mm to
20mm aerial ADSS cables at intermediate on poles. cable routes with
angle < 20° on access networks (spans up to 100m).
This hook consist with J hook,screw and sleeve.
Material of suspension clamp
J hook made of galvanized steel
The sleeve made of neoprene
The screw made of protected steel
| Product Code | Cable size
(mm) | Strength (kN) | Matreials |
| HC5-8 | 5-8 | 4 | Galvanized stell,
UV resistant plastic |
| HC8-12 | 8-12 | 4 |
| HC10-15 | 10-15 | 4 |
| HC15-20 | 15-20 | 4 |
Feature of suspension clamp with J hook
1.Two sizes to cover the full range of ADSS cables from 5 to 20mm.
2.The shape of the J hook suspension clamp allows a running out of
the cable directly in the hook.
3.The suspension clamps can be directly secured to the poles using
bolts or bandings.
4.Hook clamps also can be installed on hook bolts to provide some
flexible suspension point and give extra protection to the cable
against wind induced vibrations.
J hook suspension clamp suspended with stainless steel banding or
hose clamp.
The suspension clamp can be installed on wood poles,round concrete
poles and polygonal metallic poles using one or two 20mm pole
stainless steel banding and two buckleJ hook suspension clamp
suspended with a hook bolt
The suspension clamp can be installed on a 14mm or 16mm hook bolt
on drilled wood poles.
J hook suspension clamp suspended with a bolt
The suspenson clamp can be secured with a 14mm or 16mm bolt on
drilled wood poles.
