P1.875mm Flexible Curved LED Screen Display IP43 Indoor 800cd/Sqm
Application Of Soft LED Display
Under the increasingly demanding market requirements, led
special-shaped display screen pays more attention to structural
breakthroughs, and is more inclined to customers with special
requirements and various occasions. However, for a long time
before, LED special-shaped screens were realized by assembling or
wrapping traditional rectangular planar modules, and the most
common LED special-shaped screens were arc screens with large
radian and planar circular screens. When the radian of the display
screen is very small and the display form is more complex, it can
not solve the problems of seam and flatness, resulting in
inconsistent display, mosaic and other issues, making the overall
effect of the display screen poor. In response to this problem, LED
soft modules emerge as the times require, and many advantages are
beyond the reach of ordinary arc display screens. The
special-shaped screen connecting surface of the LED soft module is
different from the traditional display screen, the traditional PCB
board is made of glass fiber material, while the flexible module is
equipped with a high-strength lock catch and link device, a
flexible FPC circuit board made of a flexible insulating substrate,
a mask and a bottom shell are made of rubber, and the
special-shaped screen connecting surface of the LED soft module has
high-strength compression resistance and torsion resistance. It can
perfectly solve all kinds of problems of "beating around the Bush,
corners and corners" installation difficulties.
Quick detail Of Indoor Flexible LED Screen
1, Pixel Pitch: 0.9375mm,1.25mm, 1.579mm, 1.667mm, 1.875mm, 2mm, 2.5mm, 3mm, 4mm
2, Quality and High Contrast SMD LEDs, Wide viewing angle: 140°/
140°.
3, Greyscale: 16bits with NOVA Star MRV328
4, Cabinet size: Customized according actual application
5, Recommended Viewing Distance: 1-4m.
6, Cabinet Material: Aluminum Cabinet or mount to the steel
structure directly
7, Refresh Rate: 1920-3840Hz
8, Ingress Rate: IP43 Indoor
9,Quality Certificate:CE, RoHS,FCC, ETL
10,Brightness:500-800cd/sqm
11, Curve Installation: Yes, any kind of curve installation
Specification Of Indoor Soft LED Screen
| XT1.25 | XT 1.875 | XT 2 | XT 3 |
| Pixel Pitch | 1.25mm | 1.875mm | 2mm | 3mm |
| Pixel Configuration | SMD1010 | SMD1515 | SMD1515 | SMD2020 |
| Pixel Density | 64,000 pixels/m2 | 284,444 pixels/m2 | 250,000 pixels/m2 | 111,111 pixels/m2 |
| Module Dimensions(W x H) (mm) | 240 x 120 | 240 x 120 | 240 x 120 | 240 x 120 |
| Module Resolution | 192x96 | 128 x 64 | 120 x 60 | 80 x 40 |
| Panel Material | Die Cast Aluminum | Die Cast Aluminum | Die Cast Aluminum | Die Cast Aluminum |
| Weight per module | 400g |
| Digital Processing | 16bit |
| Colours | 281 trillion | 281 trillion | 281 trillion | 281 trillion |
| Contrast Ratio | 5,000 : 1 | 5,000 : 1 | 5,000 : 1 | 5,000 : 1 |
| Average Power Consumption | 200 W /Sqm | 200 W /Sqm | 200 W /panel | 200 W /panel |
| Max Power Consumption | 650 W /Sqm | 650 W /Sqm | 650 W /panel | 650 W /panel |
| Brightness | >600 nits | >750 nits | >750 nits | >750 nits |
| Refresh Rate | >3,840 Hz | >3,840 -7680Hz | >3,840 Hz | >3,840 Hz |
| Vertical Viewing Angle | 160° | 160° | 160° | 160° |
| Horizontal Viewing Angle | 140° | 140° | 140° | 140° |
| Expected Lifetime | 100,000 Hrs | 100,000 Hrs | 100,000 Hrs | 100,000 Hrs |
| Servicing | Front | Front | Front | Front |
| IP Rating (Front/Rear) | IP 43 | IP 43 | IP 43 | IP 43 |
| Operating Temp/Humidity | -20ºC - 50ºC / 10% - 90% | -20ºC - 50ºC / 10% - 90% | -20ºC - 50ºC / 10% - 90% | -20ºC - 50ºC / 10% - 90% |
| Storage Temp/Humidity | -20ºC - 50ºC / 10% - 90% | -20ºC - 50ºC / 10% - 90% | -20ºC - 50ºC / 10% - 90% | -20ºC - 50ºC / 10% - 90% |
| Scan Method | 1/48 Scan | 1/32 Scan | 1/30 Scan | 1/20 Scan |
Description Of Indoor Soft LED Display
1.1 Scope of application This specification only applies to the
240mm X 120mm modules in the XR series. The dot spacing includes
XR0.9375/XR1.25/XR1.579/XR1.667/Xr1.875/XR2/XL2.5/XR3/XR4.
1.2 Main features:
--Module standardized size design 240mm X 120mm, low current, low
heat, high contrast ratio above 5000:1, refresh 1920-3840 Hz, 14-18
bit gray scale, no delay and no smear in the image;
--The viewing angle is up to 160 °. XR soft module series is
suitable for cylindrical screen, spiral screen, wave screen, ribbon
screen and other artistic models. Application scenarios: planning
museum, science and technology museum, urban planning museum, art
gallery, museum, creative center, etc;
--The box structure adopts high-strength sheet metal sandblasting
iron box with unique sectional splicing process, which effectively
reduces the splicing gap of the screen body;
--The module is installed by strong magnetic adsorption, which can
be adjusted slightly, and the flatness of the screen body is good.
Power box front maintenance design, special scenarios, can achieve
front installation, with specific tools to meet the front
maintenance;
--The PCB board is made of flexible soft board, and the bottom
shell is made of superior silica gel material;
Module thickness is only 8.6mm, ultra-thin design, small footprint;
Our Services
1. 10 Years professional led display manufacturer
2. Short delivery time: 5-15 working days, adjustable according to
customer request
3. Wholesale price
4. OEM and ODM service
5. Customizable product upon request
FAQ
Q1. How does the semi auto corner protector work?
A: Gently push the button, the corner protector will release and
cover the corner area.
Q2. What installation options do we have?
A: Either stacking on ground or haning is supported.
Q3. Do you have any MOQ limit for led screen order?
A: Low MOQ, modules or complete screen order are all welcome.
Q4. What's the shipping method?
A: Air freight, sea and train transport according to different
region.
Q5. What's the payment method?
A: Mostly we accpet telegraphic transfer, 50% before production and
50% balance before shipment.
Q6. How do you control the production quality?
A: We manage quality starting from incoming material, all leds, ICs
and PSU are pre-inspected then go to the production line.
The modules and complete screen will have at least 72 hours aging
test, to make sure stable quality and performance.
Q7: How does warranty work?
A: We provide 1-3 years warranty for different product. Free Repair
or Exchange of Defective Parts with One way Shipping
