Indoor P3mm Curved LED Screen Soft LED Module 2880Hz Front Magnetic
Maintenance
Application Of Soft LED Display
Can adapt to complex installation environment: horizontal and
vertical bending deformation installation, even complex
installation environment can present a perfect picture;
Easy maintenance: with the original LED embedded strip structure, a
single light bar can be replaced only by screwing 3 nuts;
High protection level, no fear of bad rain weather: protection
level up to IP65, no fear of bad rain weather, can be assured to
use in outdoor environment;
Light: the weight is only about 10 kg/㎡, one person can easily
install and carry the product, saving installation time and cost;
Penetration: The product is designed with pixel strip structure, so
that the permeability of the product can reach 60%, and the wind
resistance is extremely low. * It can resist 12 levels of wind, so
you can rest assured to use the product in windy weather.
Thin: the thickness is only about 10 mm, occupying small space,
saving stage space and transportation packing space
Quick connection: professional aviation plug is selected for the
connector, which is safe and reliable, has a high protection level
not lower than IP65, and can be quickly disassembled and assembled;
High-quality power supply: select high-quality power supply to
further ensure the long-term stable operation of the product.
Quick detail Of Indoor Flexible LED Screen
1, Pixel Pitch: 1.86mm, 2mm, 2.5mm, 3mm
2, Quality and High Contrast SMD LEDs, Wide viewing angle: 140°/
140°.
3, Greyscale: 16bits with NOVA Star MRV328
4, Cabinet size: Customized according to actual application
5, Recommended Viewing Distance: 1-4m.
6, Cabinet Material: Aluminum Cabinet or mount to the steel
structure directly
7, Refresh Rate: 1920-3840Hz
8, Ingress Rate: IP43 Indoor
9,Quality Certificate:CE, RoHS,FCC, ETL
10,Brightness:500-800cd/sqm
11, Curve Installation: Yes, any kind of curve installation
Specification Of Indoor Soft LED Screen
| Pixel Pitch | 1.86mm | 2.5mm | 2mm | 3mm |
| Pixel Configuration | SMD1515 | SMD1515 | SMD1515 | SMD2020 |
| Pixel Density | 289,050 pixels/m2 | 160,000 pixels/m2 | 250,000 pixels/m2 | 111,111 pixels/m2 |
| Module Dimensions(W x H) (mm) | 320 x 160 |
| Module Resolution | 172x86 | 128 x 64 | 160 x 80 | 104 x 52 |
| Panel Material | Die Cast Aluminum | Die Cast Aluminum | Die Cast Aluminum | Die Cast Aluminum |
| Weight per module | 400g |
| Digital Processing | 16bit |
| Colours | 281 trillion | 281 trillion | 281 trillion | 281 trillion |
| Contrast Ratio | 5,000 : 1 | 5,000 : 1 | 5,000 : 1 | 5,000 : 1 |
| Average Power Consumption | 200 W /Sqm | 200 W /Sqm | 200 W /panel | 200 W /panel |
| Max Power Consumption | 650 W /Sqm | 650 W /Sqm | 650 W /panel | 650 W /panel |
| Brightness | >600 nits | >750 nits | >750 nits | >750 nits |
| Refresh Rate | >2,880 Hz |
| Vertical Viewing Angle | 160° | 160° | 160° | 160° |
| Horizontal Viewing Angle | 140° | 140° | 140° | 140° |
| Expected Lifetime | 100,000 Hrs | 100,000 Hrs | 100,000 Hrs | 100,000 Hrs |
| Servicing | Front | Front | Front | Front |
| IP Rating (Front/Rear) | IP 43 | IP 43 | IP 43 | IP 43 |
| Operating Temp/Humidity | -20ºC - 50ºC / 10% - 90% | -20ºC - 50ºC / 10% - 90% | -20ºC - 50ºC / 10% - 90% | -20ºC - 50ºC / 10% - 90% |
| Storage Temp/Humidity | -20ºC - 50ºC / 10% - 90% | -20ºC - 50ºC / 10% - 90% | -20ºC - 50ºC / 10% - 90% | -20ºC - 50ºC / 10% - 90% |
| Scan Method | 1/43 Scan | 1/32 Scan | 1/40 Scan | 1/26 Scan |
Description Of Indoor Soft LED Display
1.1 Scope of application This specification only applies to the
320mm X 160mm modules in the XR series. The dot spacing includes
1.86mm, 2mm, 2.5mm, 3mm.
1.2 Main features:
--Module standardized size design 320mm X 160mm, low current, low
heat, high contrast ratio above 5000:1, refresh 1920-3840 Hz, 14-18
bit gray scale, no delay and no smear in the image;
--The viewing angle is up to 160 °. XR soft module series is
suitable for cylindrical screen, spiral screen, wave screen, ribbon
screen and other artistic models. Application scenarios: planning
museum, science and technology museum, urban planning museum, art
gallery, museum, creative center, etc;
--The box structure adopts high-strength sheet metal sandblasting
iron box with unique sectional splicing process, which effectively
reduces the splicing gap of the screen body;
--The module is installed by strong magnetic adsorption, which can
be adjusted slightly, and the flatness of the screen body is good.
Power box front maintenance design, special scenarios, can achieve
front installation, with specific tools to meet the front
maintenance;
--The PCB board is made of flexible soft board, and the bottom
shell is made of superior silica gel material;
Module thickness is only 8.6mm, ultra-thin design, small footprint;
Our Services
1. 10 Years professional led display manufacturer
2. Short delivery time: 5-15 working days, adjustable according to
customer request
3. Wholesale price
4. OEM and ODM service
5. Customizable product upon request
FAQ
Q1. How does the semi auto corner protector work?
A: Gently push the button, the corner protector will release and
cover the corner area.
Q2. What installation options do we have?
A: Either stacking on ground or haning is supported.
Q3. Do you have any MOQ limit for led screen order?
A: Low MOQ, modules or complete screen order are all welcome.
Q4. What's the shipping method?
A: Air freight, sea and train transport according to different
region.
Q5. What's the payment method?
A: Mostly we accpet telegraphic transfer, 50% before production and
50% balance before shipment.
Q6. How do you control the production quality?
A: We manage quality starting from incoming material, all leds, ICs
and PSU are pre-inspected then go to the production line.
The modules and complete screen will have at least 72 hours aging
test, to make sure stable quality and performance.
Q7: How does warranty work?
A: We provide 1-3 years warranty for different product. Free Repair
or Exchange of Defective Parts with One way Shipping
