Tips:

How to measure Handbrake

1. First of all, the brake pad consists of two parts: one is a metal base plate, and the other is a friction plate. When braking, the friction pads come into contact with the brake disc to generate friction, which acts as a brake. Obviously, the friction lining will get thinner and thinner. The friction pad part of the new brake pads is generally 10 mm. When there are 5 mm left, it is time to consider replacing the brake pads. 2mm left is quite dangerous and the brake pads must be replaced immediately.

2. Some brake pads will hide a metal needle in the friction pad. After the friction pad is worn to a certain extent, the metal needle will contact the brake disc, and a sharp abnormal sound will be produced when braking, reminding you to replace the brake pad.

3. If the friction plate is completely exhausted, the metal base plate will be in direct contact with the brake disc, which will not only fail to brake, but also wear out the brake disc. At that time, you have to replace the brake disc together, which will cost thousands of dollars. You can clearly see the condition of the brake pads when the tire is removed. Brake pads are consumables and will gradually wear out during use. When they are worn to the limit, they must be replaced. Otherwise, the braking effect will be reduced, and even safety accidents will be caused.

Isuzu 700P NPR Handbrake




Engine Assembly and Engine Parts for More models as following:

Office:

More Spare Parts:

Packing:


Wearhouse:

Shenzhen Tai Trade Ltd, Specialized in Distributing Japanese Engine Assembly and Engine Spare Parts Since 2012. We have a large range of these Engine And Spare Parts Perfect Condition and High Quality, we can provide New and Used Engines, Spare Parts for ISUZU, MITSUBISHI, NISSAN, HINO, TOTOTA, KOMATSU, , KIA, HYUNDAI and so on.

Shenzhen Tai Trade Ltd, was established in 2002 as a special Flywheel and Ring Gear manufacturer named TWOO Auto Parts Power Factory. In 2010 we renamed to Twoo Auto Parts Co., Ltd and began to export by ourselves to all over the world. In order to expand our product line and supply more and complete service to customer, we set up our own trade company--- Twoo Auto Parts Co., Ltd in 2011.

Now we supply the Starter Motor, Alternator, Compressor, Flywheel, Clutch Parts, Crankshaft, Camshaft, Turbocharger, Brake Disc and so on. Our sales network begun from Europe and North America and now has spread to South Africa, South America, Australia, Middle East and other countries and regions.