Aluminum Conductor Busbar Joint Systems Connection One Bolt Design

One Bolt Design Aluminum Conductor Joint Busbar Systems Connection

Busduct joint

This joint stack design has taken into the consideration of a bigger contact surface of the conductors in order to reduce power loss and improve cooling performance. Double headed joint bolts together with Belleville washer ensure a sufficient pressure required to secure each joint connection. The double headed joint bolt is also designed with a specific torque value whereby the outer head of the joint bolt (which acts as tightness indication) will shear off when it reaches the limit and this will prevent over tightening of the joint section.

Installation Guidence of Busduct Joint
Step1: identify the correct joint stack (either 4W or 5W) and its phase orientation before Busduct joint pack installation

Step2: Align and connect both bus duct terminals with joint stack connectors.

Step3: Joint stack stopper acts as a guideline to ensure a full-contact surface of the overlapping conductors.

Step4: Tighten the double-headed bolt by using a socket wrench until the outer head shear off.

Step5: Place joint pack covers on both sides of the bus duct joint section and tighten all the bolts and nuts with a socket wrench.

Busduct joint is used to connect two elements of the busbar systems, it can be fitted or removed in installed condition without removal of the adjacent sections or elements .The torque nut ensures tigthness of joints at desired torque and eleminates the need of torque wrench during installation. Heavy duty side plates and Belleville washers insures uniform distribution of pressure. Joints can be tightened easily with the help of a spanner on one side only.

Suzhou Kiande Electric Co.,Ltd. is a comprehensive scientific enterprise specialized in intelligent production and data analysis for electricity manufacturing field. Company’s head office is located in Suzhou(Paradise on earth) and manufacturing center is in Zhen Jiang(Chinese electricity island).It covers R&D dept, design dept., production dept., sales dept. and after-service dept. which improves to provide better programs for production efficiency, quality, cost and data.

Specialized in manufacturing and customizing busbar production machines including manualproduction line,semi-automatic production line, automatic production line,manual inspection ma-chine, automatic inspection machine,automatic packing machine, automatic mylar film forming machine, automatic mylar film slitting machine,tape winding machine, automatic mylar wrapping ma-chine, profile processing machine, busbar conductor multifunctional processing machine , digital busbar punching machine, joint connection bar processing center, welding robot, elbow busbar produc-tion machine, NC position fixture and other machines related to busbar processing.