2g Remote Cut Off Engine GPS Tracking System ACC Detect GPS Tracker
For Car Vehicle
Main Function
· Real time tracking location by SMS/GPRS;
· GSM quad-band frequency;
· With ACC to detect ignition.;
· Set authorized number;
· For Vehicle/Motorcycle/Scooter
· Main power off alarm(With battery only)
· Over speed alarm;Geo-fence alarm;
· Connect external relay to realize controlling oil and circuit of
the vehicle(optional)
Parameter:
| Size | 98(L)*53(W)*16(H)mm |
| Battery | 850mAh / 3.7V |
| Operation Temperature | -25℃-60℃ |
| Working voltage | 9-36VDC |
| Humidity | 5% - 95% |
| GSM Frequencies | 850/900/1800/1900 MHz |
| GSM | Quectel MC25 |
| GPS | High-Quality Brand Chip |
| Position Accuracy | 5-10m |
| TTFF (Open Sky) | Cold Start: <36s |
| Warm Start:<15s |
| Hot Start:<2s |
| GSM/GPS Antenna | Internal |
| Data Transmit | TCP, SMS |
Smart features:
1. Intelligent Power Save
The terminal has a built-in high-sensitivity G-sensor accelerometer
that monitors the vehicle for motion in real time. When no motion
is detected for a long time, the terminal automatically enters the
power saving state, turns off the GPS/BD module, and GSM enters the
heartbeat return state(Range 0-999). In this state, the power
consumption of the device is extremely low, which can greatly
reduce the battery usage of the vehicle.
2. Intelligent Self-Diagnosis
The vehicle terminal can perform self-diagnosis. In the event of a
fault, it will send a fault notification to the center, such as
GPS, GSM, etc., and can automatically take relevant measures. The
backend can also query the current model, version, configuration,
running status, and device functions of the terminal.
3. Remote Control
Remotely controlling the vehicle lock, unlocking, and disable the
abnormal state of the terminal through the backend, the vehicle
terminal receives the command, and then performs corresponding
operations on the vehicle circuit or the oil circuit, and returns a
power-off/oil confirmation message to the center, and
simultaneously implements uploading the current Vehicle status.
Once the vehicle receives the power/fuel cut off command, the
vehicle terminal will memorize the status until the center issues a
recovery command.
4. Static Drift Suppression
The terminal has a built-in high-sensitivity G-sensor accelerometer
and a complete positioning data-filtering algorithm that filters
out most of the static drift data to ensure the accuracy of GPS
data.
5. Mileage Statistics
The vehicle mileage data is returned to the backend along with the
vehicle positioning data; the initial mileage can be set when the
vehicle is installed.
