8000 Litre Manual Gear Water Foam Fire Fighting Engines with Huge
Extinguishant
Fire truck (also called fire fighting vehicle , Fire engine , Fire
fighting apparatus , Fire service truck , Fire and rescue truck ,
fire truck , fire fight truck , Foam fire tank truck , Fire
extinguishing foam tanker ) is a vehicle designed primarily for
fire fighting operation to extinguish fire efficiently to prevent
fire spread , reducing the loss caused by fire maximumly .
Vehicle
| Dimension (L×W×H,mm) | 8475×2500×3400 |
| Gross weight (kg) | 19800 |
| Complete vehicle shipping mass (kg) | 11600 |
| Seats (inc. driver) | 6 |
| Max. power | 206kw |
Chassis
| Manufacturer | Sinotruk HOWO |
| Drive type | 4x2 |
| Cab | Four door lengthen cab |
| Wheelbase | 4600mm |
| Max. speed | 100km/h |
| Min. turning diameter | ≤20m |
| Approach angle | 16° |
| Departure angle | 14° |
| Clutch | pull type diaphragm |
| Gearbox | Manual, 10 forward gear |
Fire pump
| Manufacturer | SHANGHAI XIONGZHEN |
| Model | CB10/60-XZ |
| Pressure/ Flow | 1.0MPa/60L/s |
| Primer type | Piston primer pump |
| Max. vacuum degree | ≥85 kPa |
| Priming time | ≤50s |
| Air foam proportioner | PH48, manual, mixing ratio:3%, 6% |
Electrical system
The main lights in the cab at the top of the long row of lights,
configure the 100W alarm control system; a strobe lights installed
on both sides and the middle of each compartment (two red and
blue), on both sides of the vehicle is provided with LED side
lights installed below the rear side marker lamps, after the
installation of the contour light.
Side girder
Features: made of welding high quality profiled steels, two
longitudinal beams through a plurality of beam intensity bearing
joint of high strength bolt connection. The side beam is installed,
use girder structure, to ensure that the original car beam of
uniform stress, improve the service life of the girder, and reduce
deformation caused by components twisted.
FAQ:
1. Q:Are you a factory or a trade company?
A: Shanghai Jindun Special Vehicle equipment Co., LTD is one of the
biggest factories for special vehicles in China.
2. Q:Where is your factory located?
A:We are located in Shanghai Province,China.
3. Q:What's your payment method?
A: T/T and L/C are preferred.
4.Q:Do you arrange shipment for the vehicles?
A:Yes, we can arrange shippment based on trade terms.
5. Q: How is the packing?
A:All the packing comply with exporting standard.
6. Q: What's the delivery time?
A: 1) 20 days delivery upon receipt of advance deposit if we have
ready in stock for normal standard model.
2) ISUZU & Chinese brand chassis 3 months upon receipt of advance
deposit.
3) European brand chassis 9 months upon receipt of advance deposit.
Any other questions, please do not hesitate to contact with us.
