Design Load Tracked Load 72t Flaoting Bridge Pontoon Emergency
Equipment
General introduction of Design Load Tracked Load 72t Flaoting
Bridge Pontoon Emergency Equipment
Design Load Tracked Load 72t Flaoting Bridge Pontoon Emergency
Equipment is a kind of heavy pontoon equipment. It is proper for
erecting floating bridges MLC80 to guarantee tracked load 72t or
wheel load fewer than 83t to cross over the rivers whose present
velocity is less than 2.5m/s. Power pontoon bridge can also be used
as transporting rafts of 20t, 40t, 65t, and 85t.
A whole set of power pontoon bridge contains of 8 interior bays
(each interior bay is equipped with 2 x OBMs), 2 ramp bays, 10
transport vehicles and supporting equipment.
MAIN TECHNICAL DATA of Design Load Tracked Load 72t Flaoting Bridge
Pontoon Emergency Equipment
Main size of the pontoon body
Width 8.3m
Carriageway width5 m
Available velocity of flow
Vehicle loading 2.5m/s
Bridge erection 2.5m/s
Ferry with full load 2.5m/s
Design Load MLC80
Tracked load 72t
Wheel load 83t
Pontoon shape depth 0.8m
Specifications for Power Pontoon Bridge |
|
Floating bridge |
|
Length of one complete set | 104m |
Load capacity | 72(tracked load), 83t(axle load) |
Roadway width | 5m |
Current velocity | ≤3.0m/s |
Length of a single pontoon unit | 10m |
Ramp Height | not less than 3m |
Transport vehicle of of Design Load Tracked Load 72t Flaoting
Bridge Pontoon Emergency Equipment
Span Of One Whole Set 104m Emergency Equipment Power Pontoon Bridge
Transport vehicle is refitted by 8×8 wheeled cross-country truck,
with turning rack, mobile platform, stable support leg, hanger
frame, hydraulic system and electrical system on it.
The transport vehicle is used to fold, load and transport interior
and shore bays as well as to transport and erect gangplank.
COMPONENTS
Interior bay
Interior bay is used to construct pontoon bridge and ferrying raft.
An interior bay weights 10t. It is combined by 2 bow pontoons and 2
roadway pontoons. The main size of unfolded interior bay is 10m of
length, 8.3m of width and 1.35m of height with 5m of carriage way.
Each bow pontoon of interior bay has installed one set of power
system which is made up of Outboard engine, reversed frame,
operation handle, battery, control box and oil tank.
