Pontoon Shape Depth 0.8m Flaoting Bridge Pontoon Bridge
General introduction of Pontoon Shape Depth 0.8m Flaoting Bridge
Pontoon Bridge
Pontoon Shape Depth 0.8m Flaoting Bridge Pontoon Bridge is a kind
of heavy pontoon equipment. It is proper for erecting floating
bridges MLC80 to guarantee tracked load 72t or wheel load fewer
than 83t to cross over the rivers whose present velocity is less
than 2.5m/s. Power pontoon bridge can also be used as transporting
rafts of 20t, 40t, 65t, and 85t.
A whole set of power pontoon bridge contains of 8 interior bays
(each interior bay is equipped with 2 x OBMs), 2 ramp bays, 10
transport vehicles and supporting equipment.
MAIN TECHNICAL DATA of Pontoon Shape Depth 0.8m Flaoting Bridge
Pontoon Bridge
Main size of the pontoon body
Width 8.3m
Carriageway width5 m
Available velocity of flow
Vehicle loading 2.5m/s
Bridge erection 2.5m/s
Ferry with full load 2.5m/s
Design Load MLC80
Tracked load 72t
Wheel load 83t
Pontoon shape depth 0.8m
Specifications for Power Pontoon Bridge |
|
Floating bridge |
|
Length of one complete set | 104m |
Load capacity | 72(tracked load), 83t(axle load) |
Roadway width | 5m |
Current velocity | ≤3.0m/s |
Length of a single pontoon unit | 10m |
Ramp Height | not less than 3m |
Transport vehicle of Pontoon Shape Depth 0.8m Flaoting Bridge
Pontoon Bridge
Span Of One Whole Set Pontoon Shape Depth 0.8m Flaoting Bridge
Pontoon Bridge Transport vehicle is refitted by 8×8 wheeled
cross-country truck, with turning rack, mobile platform, stable
support leg, hanger frame, hydraulic system and electrical system
on it.
The transport vehicle is used to fold, load and transport interior
and shore bays as well as to transport and erect gangplank.
COMPONENTS
Interior bay
Interior bay is used to construct pontoon bridge and ferrying raft.
An interior bay weights 10t. It is combined by 2 bow pontoons and 2
roadway pontoons. The main size of unfolded interior bay is 10m of
length, 8.3m of width and 1.35m of height with 5m of carriage way.
Detailed data of OBM
| Item | Data |
| Type | YAMAHA85AETL |
| No of cylinder | 3 |
| Displacement (cm3) | 1140 |
| Diameter and stroke (mm) | 82×72 |
| output (kw/hp) | 62.5/85.0 |
| Max rotate speed (rpm) | 4500-5500 |
| Compress rate | 5.1 |
| Transmission ratio | 13:26(2.0) |
| Operation type | Line remote control |
| Oil supply | Pre-mix |
| Alternator | 10A |
| Oil tank capacity | 35L |
Ramp bay
Ramp bay is used as shore part of pontoon bridge or shore ends of
ferrying raft. The unfolded ramp bay weights 10t which is of 10m
length, 7.24m width, 1.03m height of bow pontoon and 0.8m height of
roadway pontoon.
China Harzone is one of the most professional “pontoon bridge”
manufacturers all over the world and we always make our effort to
provide our best service and products to our clients. So far, over
40 countries in Asia, Africa and Latin America have purchased our
products, including Myanmar, Thailand, Peru, Ecuador, Sudan,
Pakistan, Laos and so on.
Before offering the quotation, we need to know the exact usage
condition so that we can propose a proper technical specification.
Hereon, pls kindly supply the following information as detailed as
possible:
- The bridge location
- About the load requirement, we need to know the vehicle axle
load/tracked load. better pls send pictures or drawings of the
heaviest vehicle.
- Length and width of the bridge.
- Traffic directions: one way or two way.
- Number of roadway (Four, six or other)
- Water speed/water depth/Water level variation.
- Sea condition description (Beaufort scale)
- Local climate condition (temperature, wind speed, etc.)
- Soil geography of water bottom and embankment.
- Bank form (Steep bank, Slope, or gradient)
- Life service requirement ( for how many years the bridge is
intended for use)
- Quotation terms (EXW or other)
- Better if there are site pictures can be provided.
Please feel free to contact with us if you have any questions.
