Surface Protection Anti-Corrosion Coatings Flaoting Bridge Pontoon
Emergency Equipment
General introduction of Surface Protection Anti-Corrosion Coatings
Flaoting Bridge Pontoon Emergency Equipment
Surface Protection Anti-Corrosion Coatings Flaoting Bridge Pontoon
Emergency Equipment is a kind of heavy pontoon equipment. It is
proper for erecting floating bridges MLC80 to guarantee tracked
load 72t or wheel load fewer than 83t to cross over the rivers
whose present velocity is less than 2.5m/s. Power pontoon bridge
can also be used as transporting rafts of 20t, 40t, 65t, and 85t.
A whole set of power pontoon bridge contains of 8 interior bays
(each interior bay is equipped with 2 x OBMs), 2 ramp bays, 10
transport vehicles and supporting equipment.
MAIN TECHNICAL DATA of Surface Protection Anti-Corrosion Coatings
Flaoting Bridge Pontoon Emergency Equipment
Main size of the pontoon body
Width 8.3m
Carriageway width5 m
Available velocity of flow
Vehicle loading 2.5m/s
Bridge erection 2.5m/s
Ferry with full load 2.5m/s
Design Load MLC80
Tracked load 72t
Wheel load 83t
Pontoon shape depth 0.8m
Specifications for Power Pontoon Bridge |
|
Floating bridge |
|
Length of one complete set | 104m |
Load capacity | 72(tracked load), 83t(axle load) |
Roadway width | 5m |
Current velocity | ≤3.0m/s |
Length of a single pontoon unit | 10m |
Ramp Height | not less than 3m |
Transport vehicle of Surface Protection Anti-Corrosion Coatings
Flaoting Bridge Pontoon Emergency Equipment
Span Of One Whole Set 104m Emergency Equipment Power Pontoon Bridge
Transport vehicle is refitted by 8×8 wheeled cross-country truck,
with turning rack, mobile platform, stable support leg, hanger
frame, hydraulic system and electrical system on it.
The transport vehicle is used to fold, load and transport interior
and shore bays as well as to transport and erect gangplank.
COMPONENTS
Interior bay
Interior bay is used to construct pontoon bridge and ferrying raft.
An interior bay weights 10t. It is combined by 2 bow pontoons and 2
roadway pontoons. The main size of unfolded interior bay is 10m of
length, 8.3m of width and 1.35m of height with 5m of carriage way.
Each bow pontoon of interior bay has installed one set of power
system which is made up of Outboard engine, reversed frame,
operation handle, battery, control box and oil tank.
China Harzone is one of the most professional “pontoon bridge”
manufacturers all over the world and we always make our effort to
provide our best service and products to our clients. So far, over
40 countries in Asia, Africa and Latin America have purchased our
products, including Myanmar, Thailand, Peru, Ecuador, Sudan,
Pakistan, Laos and so on.
We will work on your requirement asap.Concerning the bridge project
that you required, before offering the quotation, we need to know
the exact usage condition so that we can propose a proper technical
specification. Hereon, pls kindly supply the following information
as detailed as possible:
- The bridge location
- About the load requirement, we need to know the vehicle axle
load/tracked load. better pls send pictures or drawings of the
heaviest vehicle.
- Length and width of the bridge.
- Traffic directions: one way or two way.
- Number of roadway (Four, six or other)
- Water speed/water depth/Water level variation.
- Sea condition description (Beaufort scale)
- Local climate condition (temperature, wind speed, etc.)
- Soil geography of water bottom and embankment.
- Bank form (Steep bank, Slope, or gradient)
- Life service requirement ( for how many years the bridge is
intended for use)
- Quotation terms (EXW or other)
- Better if there are site pictures can be provided.
Please feel free to contact with us if you have any questions.
