12" STD Seamless Pipe Fittings

Welded Pipe Fittings Seamless Carbon Steel butt weld Reducing Tee 12" Thickness STD Sch40 Sch80 ANSI ASME A234 WPB

Reducing tee: the branch tube is different from the other two diameters. The diameters of both ends are equal to equal diameter tee. Reducing tee is widely used in petrochemical, oil and natural gas, liquefied gas, fertilizer, power plant, nuclear power, shipbuilding, papermaking, pharmaceutical, food sanitation, urban construction industries of engineering construction and maintenance.

The method is as follows: for equal diameter tee, such as "T3", the outer diameter is 3 inches. For different diameters, such as "T4 x 4 x 3.5", the same diameter has a diameter of 3.5 inches. The material is generally 10# 20# A3 Q23 20g 20g 20g 16Mn ASTM A234 ASTM A234 ASTM 403, etc., three-way, the outer diameter range is 2.5 "-60", from 26 "-60" to welding three. Wall thickness of 28-60 mm.

The wall thickness level is: sch-5s, Sch10s, Sch10, Sch20, Sch30, Sch40s, STD, Sch40, Sch60, Sch80s, XS; Sch80, Sch100, Sch120, Sch140, Sch160, XXS.

Different diameter tee, generally for professional nouns, three general for pipe fittings, pipe fittings, used in the main pipe for branch. The three - pass is one of the three - way, three - general, three - way, three - way. Because the three ends can be named after the pipe.

The pressure of this kind of pipe is high in the industry, the pressure can reach 600 kg, the water pipe pressure in life is lower, generally 16 kilograms.

The three links can be used in various industries and can be divided into the following categories in different types:

1. It can be divided into top system, pressing, forging, casting and so on.

2. The division of manufacturing standards can be divided into national standard, electric standard, water standard, American standard, German standard, Japanese standard, Russian standard and so on.

Cangzhou Authentic Pipe Fitting Manufacturing Co., Ltd. is located in Mengcun County, the capital of pipe fittings in China and the center of pipe fitting manufacturing. It covers an area of 100,000 square meters and a building area of 50,000 square meters. Our company has a strong workforce. There are more than 200 employees, including more than 60 professional and technical personnel, with the ability to produce various pipe fittings.

The company has a number of pipe fittings manufacturing production lines, with independent pressing, machining, intermediate frequency hot pushing, cold forming, hot extrusion, heat treatment and other technologies. In addition, in order to ensure product quality, companies are paying more and more attention to the improvement of inspection equipment. Advanced equipment, along with corresponding testing capabilities, are constantly being used, such as chemical elemental analysis, metal testing, physical inspection, and non-destructive testing. In addition, we use advanced material composition analysis equipment - a continuous reading spectrum equipment can directly and accurately test the chemical composition of various metal materials.