Natural Resin 22600ppm Sodium Fluoride Varnish For Adults Repair Demineralization

CE,10g Profluorid Varnish Used To Prevents Cavities And Repair And Demineralization

Product Description:

I-ReHealth Fluoride Varnish is a melon-flavored dental fluoride varnish. It is suitable for preventing dental caries, repairing demineralization, repairing enamel leukoplakia and preventing demineralization during orthodontic treatment.

Product Information:

Use steps
1. Clean tooth surface:Before use, the patient can gargle to clean the residue in the mouth. After that, it can be dried with fiber cloth, cotton ball or air gun.
2. Coating:According to the patient's condition, squeeze the right amount of materials into the reference circle of the metering card, or directly squeeze them into the medical plate and surgical sleeve (each product is equipped with a corresponding number of metering cards, and the reference circle of the metering card is the reference after 0.25g of materials are spread out. Material recommendation,in deciduous dentition :no more than 0.25g；; In the mixed column: no more than 0.4g；in deciduous dentition: no more than 0.75g). Brush material is coated on the tooth surface transversely at one time.
3. After smearing, the patient is closed, and after the material meets saliva, it quickly solidifies into a film in 10-15 seconds.
4. The patient should avoid chewing within 4 hours. If necessary, soft substances and low-temperature liquid can be used. After 4 hours, brush or gargle to remove the product.

FAQ:

1. How long is the shelf life of I-ReHealth Fluoride Varnish?

Unopened 3 years. For aluminium tube: after opening, use within 3 months

2. Can the patient take it home and use the anti-caries material of I-ReHealth Fluoride Varnish by himself?

No. I-ReHealth Fluoride Varnish should be operated and used by health care personnel.

3. What's the dosage of I-ReHealth Fluoride Varnish?

Our recommended dosage for primary dentition in children is: not more than 0.25 g; The dosage of the mixed dentition shall not exceed 0.4g；Our recommended dose for adult permanent dentition is: NMT 0.75g .

Introduction

For over 8 years , Chengdu, Sichuan Province, China based I-ReHealth Medical Devices Co., Ltd always want to be one of the leading international manufacturers of dental materials. With our intensive research and development efforts in the Fluoride and other dental materials, I-ReHealth Medical Devices Co., Ltd will continues to set new products in the development of innovative dental materials products to improve dental care throughout the world.

We has a 100,000-level purification production workshop that meets GMP standards, and has advanced production and testing equipment. At the same time, it has also built a sterile room, a positive bacteria room, and a physical and chemical testing room, with international cutting-edge R&D and production transformation capabilities.