Ultrasonic Cleaning Machine Cleaner Car 6 Cylinder Electronic Tool
Fuel Injector Tester
About Machine Details
WDF-GDI injector cleaning and testing machine is designed with wide
voltage technology and is suitable for 110V and 220V voltage. It is
combined with ultrasonic cleaning technology and microprocessor
hydraulic control cleaning detection technology. Fuel pump oil
supply simulates low, medium and high engine conditions, cleaning
and testing the fuel injectors of the automobile; ultrasonic
cleaning can simultaneously clean multiple injectors, which can
effectively and completely remove carbon deposit for the
automobiles injectors.
Equipment Description :
This equipment is composed of 2 different parts:
1. Work bench
2. Ultrasonic washing tank
3. Control Screen
Installation :
1. All equipment are delivered with 3 pin electrical cable, use the
ground connection for equipment and operator protection.
2. Verify that test liquid level at 2.5L or at least between the range of two red lines. For
a new machine, please fill 2.0~ 2.5L testing liquid. Never fill up
the tank at its maximum capacity.
3. Fill up the ultrasonic cleaning tank with the liquid for
injector cleaning. Liquid level should not reach 3 cm below the
tank edge, in order to avoid liquid overflow on device. Take
special care not to drop liquid on the equipment when filling up or
emptying the tank.
Technical Characteristics :
· Appearance size:500(W)´500(D)´670mm(H) (not include ultrasonic
bath)
· Net Weight: 42 kgs
· Temperature Scope of Operation: -10℃~+40℃
Work Voltage 220 Volts AC 50 Hz.
· Test Liquid Tank Volume: 3L
· Testing Tube Volume: 200 ml
· Ultrasonic Frequency: 25 kHz
· Ultrasonic Power: 75W
· Maximum Testing Number of Cylinder: 4
· Rotation Speed: 0~9900 r/min step 50 r/min
· Pulse Duration: 1~20 ms step 0.1 ms· In
· Oil Pressure: 0~800kpa(8.0kg/cm2) (adjustable)
· 75 Watts /25KHz ultrasonic diagnostic and cleaning of injectors,
with capacity of stainless steel tank for 3L.
· Includes cables/adapters for connection of multi-purpose & CIS
injectors
· Micro processed equipment, totally programmable.
