Machined Tungsten Nickel Iron Alloy 90WNiCu For Aircraft Shocker

Tungsten Nickel Iron (W-Ni-Fe) High Density Alloy Machined Parts

Tungsten Nickel Iron (W-Ni-Fe) High Density Alloy are alloys composed of tungsten and other elements. Among metals, tungsten has the highest melting point, good high temperature strength and creep resistance, as well as thermal conductivity, electrical conductivity and electron emission properties. A heavy alloy is a sintered material that increases density by adding metals such as nickel, copper and iron to tungsten. Due to its excellent mechanical properties, such as high density, high vibration damping properties, and high Young's modulus, as well as excellent radiation shielding and heat resistance, it has been used in a wide range of fields.

Tungsten Nickel Iron (W-Ni-Fe) High Density Alloy

High Density (17 - 18.75 g/cm3)

high melting point

High radiation absorption capacity (30-40% higher than lead), excellent gamma or x-ray absorption

Good thermal and electrical conductivity

Has good plasticity and workability

Low vapor pressure, good thermal stability, small thermal expansion coefficient

Abrasion resistance

High tensile strength (700-1000Mpa), good elongation ability

We have a wide range of machining capabilities and can provide wolframam parts, medical shields, gamma ray shields, oil and gas detectors, collimators and aircraft balance weights according to customer's drawings and requirements, meeting the requirements of ASTM-B-777 standard. deliver

Tungsten Nickel Iron (W-Ni-Fe) High Density Alloy Picture:

Introduction and characteristics of Tungsten Heavy Alloy Part

1. The tungsten content of heavy tungsten alloys is 90% to 98%, which is responsible for their higher density (16.5 to 19.00g/cc). Nickel, iron and/or copper are used as metal adhesive substrates to hold the brittle tungsten particles together, making the tungsten alloy malleable and easy to work. Ferric nickel-nickel is the most commonly used additive with a ratio of 7Ni: 3Fe or 8Ni: 2Fe (by weight).
2. A common method of preparing heavy tungsten alloys is to mix the desired amount of tungsten, iron, nickel or copper powder and then perform cold pressing and liquid phase sintering to near full density. During the liquid phase treatment, the base tungsten alloy melts and causes some tungsten to enter the solution, forming a microstructure through which large tungsten particles (20-60μm) are dispersed in the base alloy.

Application of Tungsten Heavy Alloy Part

• Thermoelectric generator is a fusion power device that uses radioactive isotopes. It can use high-density tungsten alloys as containers. Widely used in weather stations, light buoys, acoustic communication beacons, ocean research and other fields.

JINXING MATECH is a research and development, production, processing and sales of integrated, comprehensive refractory metal, precious metal material manufacturer.JINXING MATECH is an expert provider on the metal solution. Especially on the products such as Tungsten , Tungsten copper , Titanium , Zirconium, Vanadium, Hafnium, Sputtering Target , Nickel base alloy, Cobalt base alloys etc, products quality supplied according to ASTM , ASME , AMS , MIL , ISO , DIN and EN Standard which mainly used in Semiconductor, Petro-Chemical, Solor , Medical , Aerospace, Military industries.

So far JINXING MATECH's has attracted more than 50 countries customers in We mainly supply to the Market such as Canada, Sweden, Italy, Denmark, India, New Zealand , Mexico, South Korea , Netherland , Australia , India and Southeast Asia coutries sand many other countries and regions by reliable qualities, professional service and cost effective pricing. JINXING MATECH's production and inspection equipments include 100tons Hydraulic press, 20 tons Automation Controls Press, Vacuum Pressure Sintering Furnace , Electro-sparking wire cut machine ,powder metal Mixer, Granulation Drum, Hydrogen Sintering Furnace, Rochwell and Brinell hardness meters ,Metallocope , carbon and oxygen analyser etc.. JINXING MATECH's has 8,000 square meters construction area as well as two workshops ,JINXING MATECH people keep improving products quality and inspect the density, hardness and composition of finished products strictly, which ensures every product meets customers' requirements.

Technology Process

Strong manufacturing capabilities along with a full-scale R&D and test lab give us the ability to fully control all process of raw materials preparing, manufacturing, inspection, packing and delivery.

Our success is built on long-standing customer relationships, the quality of our sputtering targets and the level of technical and logistic services and sensitivity to economic, political and environmental issues. Within our organization, we are continually challenging our own performance.

All of our core technical team members have more than 10 years professional experience of both R&D and high volume manufacturing. Our business operations and logistics team is staffed with experienced professionals to provide friendly and timely support and services to our customers.

Quality Assurance

Special Metals Fabrication is an ISO 9001: 2015 accredited company. Our attitude to quality assurance means we are continually striving to improve our company and to ensure we are working to the highest possible standards.

Quality is a big part of every day at Special Metals Fabrication. Each service we offer has its own team of experts, making sure everything we offer complies within the standards we have set.