IP67 HART RF Capacitance Level Switch 220VAC Screw Thread 20m Cable

NYSP-DR RF Capacitance Liquid Level Meter​​

NYSP-DR RF Capacitance Liquid Level Meter​​ Operating Principle

The working principle of NYSP-DR RF capacitance liquid level meter is based on RF (RF) capacitance technology. A radio frequency is applied to the probe to determine the impact of the surrounding environment through continuous analysis. Because all the materials have dielectric constant and their conductivity is different from that of air, the total impedance of the probe is changed because of the small capacitance deviation when the probe is in contact with the material. Because the electric probe and the wall of the container form the two polar plates of the capacitor, the insulator of the probe and the surrounding air become the dielectric material. When air (dielectric constant 1.0) is replaced by any other material (dielectric constant > 1.0) The change of capacitance caused the change of impedance. This effect is measured by the circuit and compared with the reference set up by the sensitivity setting (circuit).

NYSP-DR RF Capacitance Liquid Level Meter​​ Technical Parameter

※ Note: Products can be customized according to the specific requirements of users!

NYSP-DR RF Capacitance Liquid Level Meter​​ Design Features

• Modular converter and sensor integration, no moving parts, high reliability, strong anti-jamming ability;
• More extensive applicability, there are a variety of probe forms, a variety of process connection forms, a variety of production materials, customizable design;
• Installation, debugging and maintenance are extremely convenient

NYSP-DR RF Capacitance Liquid Level Meter​​ Installation requirements

In addition to double rod type, three installation modes, thread, flange or support, can be selected.

• LCP: is fitted with 1mm thick PTFE insulator on stainless steel rod.
  LCW: is coated with 0.3mm thick PTFE material on copper cable.

NYSP-DR RF Capacitance Liquid Level Meter​​ Electrical connections

• Two of the four terminals are power supply,【+】 【一】 indirect 24vDC power supply; [TEST+]【TEST-】 indirect ammeter can measure 4~20mA signal.

NYSP-DR RF Capacitance Liquid Level Meter​​ Application field

Capacitive level meter can be used for continuous level measurement of almost all strong, weak corrosion resistant and non-corrosive media in open or pressxire vessels. Widely used in: Petroleum, Chemical, Fertilizer, Metallurgy, Natural Gas, Power Plant, Machinery Manufacturing, ship, Pharmaceutical Factory, sewage treatment, Food, Liquor and other industrial occasions of liquid level detection and control.

Company Introduction

 Shaanxi Nuoying Automation Instrument Co., Ltd. is a high-tech enterprise specializing in research and development, production, sales of industrial automation instruments and providing Internet of Things solutions.

At present, the company has obtained more than 100 patents and more than 20 soft patents. It has passed IS09001 quality management, IS014001 environmental management, IS045001 Occupational Health and safety management, Occupational Health and Safety Management, GBT29490 Intellectual Property Management, military standard, information security and other system certification and EU CE certification, Russian EAC certification, ATEX explosion-proof certification and SIL certification and other qualifications.

The company is committed to the system integration of process measurement, control, management and other aspects of the system and the development, development, production, sales and service of intelligent instruments and instruments of the Internet of Things.At present, it has metering level FM radar level, pulse radar level, radio frequency guide level, liquid level of magnetover, magnetoexpansion level, sound fork density (level), pressure, flow, multi-point thermometer, analysis, system and tank area meter.The products are widely used in petrochemical industry, coal chemical industry, metallurgy, electric power, building materials, food and medicine and environmental protection water treatment and other industries.

The company can provide customers with location, pressure, temperature, flow, measurement requirements of analytical instruments and cooperation of the Internet of T scheme.