25A 10kg / cm2 x 127L Flanged Globe Valve STS304 HAND WHEEL
Forged Steel Integarl Flanged Valve
Brief introduction:
Integral flanged valves are available in three bonnet designs.
The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F304L/graphite.Ring joint gasket are also available on request.
The second design is the welded bonnet, with a threaded and seal welded joint. On request a full pen- extraction strength welded joint is available.
The third design is the pressure seal bonnet, with a threaded and pressure seal joint. Integral Flanged end valves are available in gate, globe, piston, check, and swing check design configurations.
Technical Specification
* Integral flange valves conform to API 602,and ANSI B16.34.
* Each is tested according to API 598, and marking is per MSS SP-25.
* Full Port and Conventional Port
* Face to face according t ANSI B16.10
* Flanges according to ANSI B16.5
* Pressure seal bonnet
* Outside Screw and Yoke (OS & Y)
* Two piece self-aligning packing gland
* Integral backseat
* Integral body flanges
* Butt Welded Ends to ASME B16.25
* RTJ bonnet gasket ring joint type
* Bolted bonnet with spiral wound gasket, threaded and seal welded bonnet or threaded and pressure seal bonnet
Standard Material Specification
| NO. | Part Name | CS to ASTM | AS to ASTM | SS to ASTM |
| Type A105 | Type F22 | Type F304(L) | Type F316(L) |
| 1 | Body | A105 | A182 F22 | A182 F304(L) | A182 F316(L) |
| 2 | Stem Ring | A276 420 | A276 304 | A276 304(L) | A276 316(L) |
| 3 | Wedge | A276 410 & 430 | A182 F304 | A182 F304(L) | A182 F316(L) |
| 4 | Stem | A182 F6 | A182 F304 | A182 F304(L) | A182 F316(L) |
| 5 | Gasket | Corrugated SS+ graphite | SS+PTFE |
| 6 | Bonnet | A105 | A182 F22 | A182 F304(L) | A182 F316(l) |
| 7 | Bonnet Bolt | A193 B7 | A193 B16 | A193 B8 | A193 B8M |
| 8 | Pin | A276 420 | A276 304 |
| 9 | Gland | A276 410 | A182 F304(L) | A182 F316(L) |
| 10 | Gland Eyebolt | A193 B7 | A193 B16 | A193 B8 | A193 B8M |
| 11 | Gland Flange | A105 | A182 F11 | A182 F304(L) | A182 F316(L) |
| 12 | Gland Nut | A194 2H | A194 4 | A194 8 | A194 8M |
| 13 | Yoke Nut | A276 410 |
| 14 | H.W.Lock Nut | A194 2H | A194 4 | A194 8 | A194 8M |
| 15 | Nameplate | SS |
| 16 | Hand wheel | A197 |
| 17 | Lubricated Gasket | A473 431 |
| 18 | Stem Packing | Flexible Graphite | PTFE |
| Suitable Medium | Water, oil, gas etc., | Water, oil, gas etc., | HNO3,CH3OOH etc |
| Suitable Temperature | -29℃～425℃ | -29℃～550℃ | -29℃～180℃ |
Dimension (mm) and Weight (Kg)
| NPS | 1/2" | 3/4" | 1" | 11/4" | 11/2" | 2" |
L(RF)
L1(BW) | 150Lb | 108 | 117 | 127 | 140 | 165 | 203 |
| 300Lb | 140 | 152 | 165 | 178 | 190 | 216 |
| 600Lb | 165 | 190 | 216 | 229 | 241 | 292 |
| H | 150Lb～300Lb | 158 | 169 | 197 | 236 | 246 | 283 |
| 600Lb | 169 | 197 | 236 | 246 | 283 | 320 |
| W | 100 | 100 | 125 | 160 | 160 | 180 |
| Weight | 150Lb | RF | 4.5 | 5.2 | 8.2 | 11.5 | 12.5 | 20.3 |
| BW | 2.8 | 3.3 | 5.4 | 7.1 | 8.2 | 12.5 |
| 300Lb | RF | 4.8 | 6.2 | 9.3 | 14 | 15.5 | 23.4 |
| BW | 3.5 | 4.4 | 6.8 | 8.1 | 9.2 | 15.4 |
| 600Lb | RF | 5.9 | 7.4 | 10.4 | 16.2 | 17.5 | 28.3 |
| BW | 4.5 | 5.1 | 8.2 | 10.5 | 12.4 | 20.1 |
Flanged End Globe Valve 900Lb～1500Lb
| NPS | 1/2" | 3/4" | 1" | 11/2" | 11/4" | 2" |
| L(RTJ) | 900Lb～1500Lb | 216 | 229 | 254 | 279 | 305 | 371 |
| L1(BW) | 900Lb～1500Lb | 216 | 229 | 254 | 279 | 305 | 368 |
| H(OPEN) | 197 | 197 | 236 | 246 | 283 | 330 |
| W | 125 | 125 | 160 | 160 | 180 | 200 |
| Weight | RTJ | 7.2 | 11.5 | 15.6 | 16.2 | 22.6 | 32.8 |
| BW | 5.2 | 9.3 | 12.4 | 13.8 | 18.9 | 27.5 |
Flanged End Pressure-seal Globe Valve 900Lb～2500Lb
| NPS | 1/2" | 3/4" | 1" | 11/4" | 11/2" | 2" |
| L(RTJ) | 900Lb～1500Lb | 216 | 229 | 254 | 279 | 305 | 368 |
| 2500Lb | 264 | 273 | 308 | 349 | 384 | 451 |
| H(OPEN) | 900Lb～1500Lb | 216 | 250 | 270 | 320 | 250 | 445 |
| 2500Lb | 321 | 321 | 321 | 373 | 406 | 495 |
| W | 160 | 160 | 180 | 200 | 250 | 280 |
| Weight | 900Lb～1500Lb | 19.6 | 21.5 | 25.7 | 37.8 | 48.5 | 99.8 |
| 2500Lb | 21.5 | 24.7 | 30.4 | 48.1 | 58.1 | 130.0 |
The globe valve is designed reference to advanced internal and international standard.Adopting different material, the valve may works with different medium, such as water,oil,gas,steam,carbamide and other medium.
| selection of possible applications: |
| (industry) (power station) |
| (flue gas puerification plant) (gas supply) |
| (vacuum facilities) (ammonia) |
| (hot water) (cllling&freezing systme) |
| (heating technology) (steam system) |
| Features |
| Outside Screw and Yoke (OS & Y), Rising Stem |
| Bolted Bonnet |
| Conic Disc |
| Extended Bonnet for Cryogenic Services |
| Impact hand wheel optional |
| Gear Optional |
| Specifications |
| Design: ASME B16.34/BS 1873 |
| Face to Face: ASME B16.10 |
| End to End: ASME B16.10 |
| End Flange: ASME B16.5 |
| BW End: ASME B16.25 |
| Test: API 598 |
| Special: NACE MR-01-75 |
Notes:The size of serial,valve connecting flange can be design according to customers reguirment.
Products performance specification
| Parts | Materials |
| Body | ASTM A216 GR.WCB |
| Seat Ring | ASTM A105 + Stellite Faced |
| Disc | ASTM A105 + 13Cr Faced |
| Disc Thrust Plate | ASTM A276 Type 420 |
| Disc Nut | ASTM A276 Type 410 |
| Stem | ASTM A182 GR.F6 |
| Bonnet Bolt Nuts | ASTM A194 GR.2H |
| Bonnet Bolts | ASTM A193 GR.B7 |
| Gasket | Soft Iron + Graphite |
| Backseat Bushing | ASTM A276 Type 410 |
| Stem Packing | Braided Graphite & Die formed Graphite Ring |
| Bonnet | ASTM A216 GR.WCB |
| Eyebolt Pins | Carbon Steel |
| Gland | ASTM A276 Type 410 |
| Gland Flange | ASTM A216 GR.WCB |
| Gland Eye Bolts | ASTM A307 GR.B |
| Eyebolt Nuts | ASTM A194 GR.2H |
| Yoke Bush | ASTM A439 GR.D-2 |
| Screw | Carbon Steel |
| Hand Wheel | Ductile Iron |
| Hand Wheel Nut | ASTM A194 GR.2H |
| Washer | Carbon Steel |
| Yoke | ASTM A216 GR.WCB |
| Yoke Pan Bolt Nuts | ASTM A194 GR.2H |
| Yoke Pan Bolt | ASTM A193 GR.B7 |
| Bearing | Steel |
| Lantern Ring On Request | ASTM A276 Type 410 |
Main Dimensions
ASME Pressure Class 150 Lb-Dimensions and Weights
| | | | | | | | | | | | | |
| NPS | in | 2 | 2.5 | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 14 | 16 |
| d | mm | 51 | 64 | 76 | 102 | 127 | 152 | 203 | 254 | 305 | 337 | 387 |
| L-L1 | in | 8 | 8.5 | 9.5 | 11.5 | 14 | 16 | 19.5 | 24.5 | 27.5 | 31 | 36 |
| (RF-BW) | mm | 203 | 216 | 241 | 292 | 356 | 406 | 495 | 622 | 698 | 787 | 914 |
| L2 | in | 8.5 | 9 | 10 | 12 | 14.5 | 16.5 | 20 | 25 | 28 | 31.5 | 36.5 |
| (RTJ) | mm | 216 | 229 | 254 | 305 | 368 | 419 | 508 | 635 | 711 | 800 | 927 |
| H | in | 13.43 | 14.45 | 14.76 | 19.02 | 21.14 | 20.35 | 23.23 | 29.69 | 37.05 | 42.72 | 38.03 |
| (open) | mm | 341 | 367 | 375 | 483 | 537 | 517 | 590 | 754 | 941 | 1085 | 966 |
| W | in | 7.87 | 9.84 | 9.84 | 11.81 | 11.81 | 13.78 | 15.75 | 17.72 | 25.2 | 25.2 | 18.11 |
| mm | 200 | 250 | 250 | 300 | 300 | 350 | 400 | 450 | 640 | 640 | 460 |
| WT | BF | 22 | 29 | 42 | 64 | 77 | 105 | 154 | 288 | 507 | 617 | 810 |
| (Kg) | BW | 19 | 25 | 34 | 49 | 65 | 82 | 131 | 249 | 430 | 580 | 763 |
ASME Pressure Class 300 Lb-Dimensions and Weights
| NPS | in | 2 | 2.5 | 3 | 4 | 5 | 6 | 8 | 10 | 12 |
| d | mm | 51 | 64 | 76 | 102 | 127 | 152 | 203 | 254 | 305 |
| L-L1 | in | 10.5 | 11.5 | 12.5 | 14 | 15.75 | 17.5 | 22 | 24.5 | 28 |
| (RF-BW) | mm | 267 | 292 | 318 | 356 | 400 | 444 | 559 | 622 | 711 |
| L2 | in | 11.12 | 12.12 | 13.12 | 14.62 | 16.37 | 18.12 | 22.62 | 25.12 | 28.62 |
| (RTJ) | mm | 283 | 308 | 333 | 371 | 416 | 460 | 575 | 638 | 727 |
| H | in | 13.74 | 14.8 | 16.93 | 19.13 | 22.05 | 24.33 | 36.89 | 37.36 | 39.17 |
| (open) | mm | 349 | 376 | 430 | 486 | 560 | 618 | 937 | 949 | 995 |
| W | in | 7.87 | 9.84 | 9.84 | 13.78 | 15.75 | 17.72 | 2.05 | 25.2 | 18.11 |
| mm | 200 | 250 | 250 | 350 | 400 | 450 | 560 | 640 | 460 |
| WT | BF | 31 | 43 | 57 | 86 | 130 | 168 | 280 | 385 | 724 |
| (Kg) | BW | 26 | 38 | 44 | 68 | 110 | 138 | 228 | 329 | 618 |
ASME Pressure Class 300 Lb-Dimensions and Weights
| NPS | in | 2 | 2.5 | 3 | 4 | 6 | 8 | 10 | 12 |
| d | mm | 51 | 64 | 76 | 102 | 152 | 200 | 248 | 298 |
| L-L1 | in | 11.5 | 13 | 14 | 17 | 22 | 26 | 31 | 33 |
| (RF-BW) | mm | 292 | 330 | 356 | 432 | 559 | 660 | 787 | 838 |
| L2 | in | 11.62 | 13.12 | 14.12 | 17.12 | 22.12 | 26.12 | 31.12 | 33.12 |
| (RTJ) | mm | 295 | 333 | 359 | 435 | 562 | 664 | 791 | 841 |
| H | in | 16.73 | 19.76 | 20.51 | 24.41 | 34.88 | 36.69 | 40.94 | 50.39 |
| (open) | mm | 425 | 502 | 521 | 620 | 886 | 932 | 1040 | 1280 |
| W | in | 9.84 | 11.81 | 13.78 | 17.72 | 22.05 | 18.11 | 24.02 | 29.92 |
| mm | 250 | 300 | 350 | 450 | 560 | 460 | 610 | 760 |
| WT | BF | 39 | 58 | 73 | 120 | 327 | 482 | 700 | 900 |
| (Kg) | BW | 33 | 48 | 61 | 95 | 261 | 385 | 588 | 795 |
Brief introduction:
The globe valve is designed reference to advanced internal and international standard. The body adopt
sphere configuration, and it also has the feature of good appearance, nice function and superior quality.
Apply from CLASS150 to CLASS1500, and -29℃～425℃(steel), -40℃～550℃(stainless steel).
Using different material, the valve may works with different medium, such as water,oil,gas,steam,carbamide
and other medium.
Features:
- Back seal
Back seal design to ensure dependable packing and sealing when valve is fully opened.(Replacement of packing under pressure is not recommended)
- Resist friction
Valve disc is given enough intensity and rigidity. Disc sealing surface may be built-up welded with satellite
alloy inlaid or other material responding to the users’ requests .
- Precise design:
Design the body and bonnet according to precise calculation. Body and bonnet have high strength ,
rigid and flow ability .
Mail part & material
| | Item Name of parts | material |
| 1 | Body | WCB, CF8, CF8M |
| 2 | Seat | 2Cr13,25+ satellite |
| 3 | Disc | 2Cr13, 304, 25+satelite |
| 4 | Stem | 2Cr13, 304, 304L |
| 5 | Gasket | Graphite+304, Graphite+08 steel |
| 6 | Bonnet | WCB,CF8,CF8M |
| 7 | Packing | Graphite,PTFE |
| 8 | Hand wheel | HT250,QT450 |
Technical Specification
-Nominal diameter: 2”-12”
-Applicable Temperature: -29℃～425℃(steel) -40℃～550℃
(stainless steel)
-Nominal pressure: 150Lb 300Lb 600Lb 900Lb 1500Lb
-Applicable Medium: water ,gas,oil,and other causticity medium.
Applications Standard
-Manufacture standard : ANSI B16.34
-Face to face dimension: ANSI B 16.10
-Flange dimension: ANSI B 16.5
-Test: API 598
Description:
Main external and connection dimension
| | CLASS150 |
| size(in) | 2" | 2-1/2" | 3" | 4" | 5" | 6" | 8" | 10" | 12" |
| L,L1-RF.BW(mm) | 203 | 216 | 214 | 292 | 330 | 356 | 495 | 622 | 698 |
| L2-RTJ(mm) | 216 | 229 | 254 | 305 | 343 | 368 | 508 | 635 | 711 |
| H(mm) | 330 | 390 | 410 | 475 | 540 | 585 | 725 | 825 | 940 |
| K(mm) | 200 | 250 | 250 | 300 | 350 | 350 | 450 | 500 | 600 |
| Weight(Kg) | 23 | 29 | 40 | 59 | 95 | 115 | 178 | 268 | 385 |
| | CLASS300 |
| size(in) | 2" | 2-1/2" | 3" | 4" | 5" | 6" | 8" | 10" | 12" |
| L,L1-RF.BW(mm) | 267 | 292 | 318 | 355 | 400 | 440 | 533 | 622 | 711 |
| L2-RTJ(mm) | 283 | 308 | 333 | 371 | 416 | 460 | 549 | 638 | 727 |
| H(mm) | 350 | 425 | 485 | 520 | 565 | 655 | 825 | 920 | 1155 |
| K(mm) | 200 | 250 | 300 | 300 | 350 | 350 | 500 | 600 | 700 |
| Weight(Kg) | 30 | 45 | 60 | 83 | 135 | 162 | 265 | 375 | 525 |
| | CLASS600 |
| size(in) | 2" | 2-1/2" | 3" | 4" | 5" | 6" | 8" | 10" |
| L,L1-RF.BW(mm) | 292 | 330 | 356 | 432 | 508 | 559 | 660 | 787 |
| L2-RTJ(mm) | 295 | 333 | 359 | 435 | 511 | 562 | 664 | 791 |
| H(mm) | 420 | 490 | 550 | 590 | 620 | 700 | 950 | 1140 |
| K(mm) | 250 | 300 | 300 | 350 | 500 | 500 | 600 | 600 |
| Weight(Kg) | 39 | 61 | 76 | 122 | 210 | 245 | 447 | 692 |
| | CLASS900 | |
| size(in) | 2" | 2-1/2" | 3" | 4" | 5" | 6" | 8" | |
| L,L1-RF.BW(mm) | 368 | 419 | 381 | 457 | 559 | 610 | 737 | |
| L2-RTJ(mm) | 371 | 422 | 384 | 460 | 562 | 613 | 740 | |
| H(mm) | 495 | 540 | 600 | 655 | 670 | 780 | 1050 | |
| K(mm) | 300 | 350 | 350 | 500 | 500 | 350* | 350* | |
| Weight(Kg) | 96 | 79 | 117 | 178 | 305 | 355 | 730 | |
| Note: Use "*", mean have fixed the gear box. | |
| | CLASS1500 |
| size(in) | 2" | 2-1/2" | 3" | 4" | 6" |
| L,L1-RF.BW(mm) | 368 | 419 | 470 | 546 | 705 |
| L2-RTJ(mm) | 371 | 422 | 473 | 549 | 711 |
| H(mm) | 550 | 582 | 625 | 750 | 925 |
| K(mm) | 300 | 350 | 400 | 450 | 600 |
| Weight(Kg) | 116 | 125 | 145 | 210 | 475 |
