ZLG-1.5x9 Series Horizontal Continuous Vibrating Fluidized Bed
Dryer For Sugar
Adopts dry pressing technology to pressure material with moisture
content of lower than
10% into sheets, and it’s processed into required particles through
breaking, granules treaming and screening process.
The material is pressed by exterior force, and passes through the
gap between the two rollers which are rotating in different
directions, and then it's pressed into sheets. The mass density of
material might increase 1.5-3 times, so to achieve required
strength.
The material is forced and to be pressed by mechanical force,
without any additional ingredients, so to ensure purity.
The dry material is made into granules directly, no need any
further drying process. So it's good for product process.
The strength of the particles are high, the mass density is
increased more apparently compare to other method of granulation.
It's especially applicable for to increase the mass density of
product.
The pollution of environment is controlled, the wasted powder is
reduced, the packaging fee is decreased and the product is easier
in transportation.
The structure is compact, the maintenance is convenient, the
operation is simple, the process is short, the energy consumption
is low, the efficiency is high, the probability of fault is low,
the application range is wide, and the pressure of roller might be
adjusted freely
according to the property of material.
The material feeding adopts non-step inverter control, the
automation level is high. One operation high control muti-units of
machine. The labor intensity is low, and the machine might run
continuously in long time.
Adopt high quality alloy, stainless steel, Ti, Cr and other metal
for driving parts, the wear-resistance, cossive-resistance,
thermo-resistance and pressure-resistance is highly increased. The
service life is long.
Dry material powder is fed from the top of the equipment, de-air,
screw-pre-press, enter into the gap between the two rollers that
are rotating in opposite directions. The pressed material falls
down because of surface tension and gravity when passes through
pressing section. The noodles shaped material then enters into
breaking machine, been smashed by rotating knife. The smashed
material enters into granulator, and then the particles and part of
powder material enters into sieve by the rolling knife, and then
the product is separated. The product up to standard will be
conveyed to product silo by conveyor; the material under the sieve
should be fed back and should be pressed again. The pressure might
adjust by the hydraulic oil cylinder according the requirements of
granulation.
Sheet, bar and other shape of product might be procured by choose
the relative shape of the grooves on the surface of the roller.
Hopper Lifting Machine.Fine Power recycleParticle of
productGrinding & Granulation devicetro-chemical, fine chemical,
pharmaceutical, foodstuff, metal powder, Bio-engineering,
pesticide, fertilizer, mine and coal
Fluid Bed Dryer Technical Parameters
| Model | A | B | C | D | E | F | Weight(kg) |
| VFBD-3x0.3 | 3000 | 300 | 1350 | 900 | 430 | 1650 | 1250 |
| VFBD-4.5x0.3 | 4500 | 300 | 1350 | 900 | 430 | 1650 | 1560 |
| VFBD-4.5X0.45 | 4500 | 450 | 1550 | 950 | 430 | 1700 | 1670 |
| VFBD-4.5X0.6 | 4500 | 600 | 1650 | 950 | 430 | 1700 | 1910 |
| VFBD-6x0.45 | 6000 | 450 | 1650 | 950 | 430 | 1700 | 2100 |
| VFBD-6x0.6 | 6000 | 600 | 1700 | 1000 | 500 | 1700 | 2410 |
| VFBD-6x0.75 | 6000 | 750 | 1850 | 1000 | 600 | 1850 | 2340 |
| VFBD-6x0.9 | 6000 | 900 | 2000 | 1000 | 600 | 1850 | 3160 |
| VFBD-7.5x0.6 | 7500 | 600 | 1850 | 1000 | 600 | 1850 | 3200 |
| VFBD-7.5x0.75 | 7500 | 750 | 2000 | 1000 | 600 | 1850 | 3600 |
| VFBD-7.5x0.9 | 7500 | 900 | 2100 | 1000 | 600 | 1850 | 4140 |
| VFBD-7.5x1.2 | 7500 | 1200 | 2500 | 1150 | 800 | 2050 | 5190 |
| VFBD-7.5x1.5 | 7500 | 1500 | 2850 | 1570 | 800 | 2370 | 6426 |
| VFBD-8x1.8 | 8000 | 1800 | 3250 | 1800 | 900 | 2700 | 8600 |
| Model | Area of fluidized bed(M2) | Inlet air temperature(oC) | Outlet air temperature(oC) | Water evaporation(kg/h) | Vibration motor model | Vibration motor power |
| VFBD-3x0.3 | 0.9 | 70-140 | 40-70 | 20-35 | YZS8-6 | 0.75x2 |
| VFBD-4.5x0.3 | 1.35 | 35-50 | YZS10-6 | 0.75x2 |
| VFBD-4.5X0.45 | 2.025 | 50-70 | YZS15-6 | 1.1x2 |
| VFBD-4.5X0.6 | 2.7 | 70-90 | YZS15-6 | 1.1x2 |
| VFBD-6x0.45 | 2.7 | 80-100 | YZS15-6 | 1.5x2 |
| VFBD-6x0.6 | 3.6 | 100-130 | YZS20-6 | 1.5x2 |
| VFBD-6x0.75 | 4.5 | 120-170 | YZS20-6 | 2.2x2 |
| VFBD-6x0.9 | 5.4 | 140-170 | YZS30-6 | 2.2x2 |
| VFBD-7.5x0.6 | 4.5 | 130-150 | YZS30-6 | 2.2x2 |
| VFBD-7.5x0.75 | 5.625 | 150-180 | YZS40-6 | 3.0x2 |
| VFBD-7.5x0.9 | 6.75 | 160-210 | YZS40-6 | 3.0x2 |
| VFBD-7.5x1.2 | 9.0 | 200-280 | YZS50-6 | 3.7x2 |
| VFBD-7.5x1.5 | 11.25 | 230-330 | YZS50-6 | 3.7x2 |
| VFBD-8x1.8 | 14.4 | 290-420 | YZS75-6 | 5.5x2 |
Fluid Bed Dryer Application
This dryer is widely used for drying, cooling, wetting of the
products in the light industry, chemical industry, pharmaceutical
industry, foodstuff, and etc.
Applicable Materials:
Boric Acid, Borax, Dihydroxybenzene, Malic Acid, Maleic Acid,
Monosodium Glutamate, Oxalate, Potassium, Permanganate, Sesame,
Pentaerythritol, HPAM, Hypha Protein, Sodium Sulfate, Sodium
Borate, Plastic Archon, Catalyst, Baking Soda, Detergent, Quartz
Sand, Bean Pulp, Edible Sugar, Refine Salt, Bean, Seeds, Mining
Slag, Activated Clay, Compound Fertilizer, and etc.
Contact Me
