1A1R Diamond Wheels 5 inch Diameter 1.0mm Thickness For Carbide
Shine Abrasives 1A1R Diamond Wheels 5 Inch 125mm diameter For
Tungsten Carbide tools Cutting off
the cutting off wheels with Resin bond, the thickness is 1.0mm, the
wheels bore is 20mm.
Wheels are Good self-sharpening, sharp cutting, flexible binder,
can improve surface quality,
mainly used for carbide tools or bars cutting.
Drawing of Shine Abrasives 1A1R Diamond Wheels 5 inch Diameter 1.0mm Thickness For Carbide
Main sizes form of Shine Abrasives 1A1R Diamond Wheels 5 inch Diameter 1.0mm Thickness For Carbide
| Abrasive Material:Diamond | Bond Type:Resin |
| Diamond Grit:D151 | Wheel Diameter: 6inch 150mm |
| Wheel Bore:31.75mm | Rim width:7mm |
| Wheel Thickness:1.0mm | Wheel core: Steel |
Other standard sizes also are available as requested.
Precautions for use:
1. Please check carefully before installing the cutting wheel, if
there is any chip or other damage, please stop using it.
2. When the cutting wheel is marked with the direction of rotation,
it should be consistent with the rotation direction of the machine
tool. On the contrary, the cutting is not sharp, and it is
difficult to exert the performance of the cutting wheel. 3. Please
do not use cut-off wheels that do not meet the requirements.
4. If any abnormality is found during the cutting process, stop the
machine immediately and investigate the cause.
5. When the cutting is not sharp, the grinding wheel should be
trimmed and edged. If you continue to use it, there will be
overheating and overloading, which may damage the grinding wheel.
6. During the rotation of the grinding wheel, it is strictly
forbidden to cut by hand, let alone touch the sand with hands and
body.
7. The cutting wheel is forbidden to be used for operations other
than grooving or cutting to avoid abnormality due to uneven force.
Application picture for reference.
Attention:Workers should ensure that you are fully informed on the
safe operation of abrasive cutting and grinding wheels
