Gost Stainless Steel 1.6/2.5/4.0/6.4 Mpa Flange End Lift Check Valve

Introduction

This valve is suitable on the nitric acid type pipeline does prevents the medium adverse current to open one way shuts.

Installation mode

1.for the check valve with the valve disc sliding along the vertical center line of the valve body, the internal thread check valve can only be installed on the horizontal pipeline, and the valve disc on the high-pressure small-diameter check valve can adopt a ball. The body shape of butterfly check valve is the same as that of stop valve (which can be used as stop valve), so its fluid resistance coefficient is large. Its structure is similar to the stop valve, and the valve body and disc are the same as the stop valve. The upper part of the valve disc and the lower part of the valve cover are processed with a guide sleeve. The valve disc guide sleeve can rise and fall freely in the valve disc guide sleeve. When the medium flows downstream, the valve disc opens by the thrust of the medium. When the medium stops flowing, the valve disc falls on the valve seat vertically to prevent the reverse flow of the medium. The direction of medium inlet and outlet channel of straight through butterfly check valve is perpendicular to that of valve seat channel; For vertical lift check valve, the direction of medium inlet and outlet channel is the same as that of valve seat channel, and its flow resistance is smaller than that of straight through check valve

2.a valve whose disc slides along the center line of the valve body. Pipeline check valve is a new valve. It has small volume, light weight and good processing technology. It is one of the development directions of check valve. However, the fluid resistance coefficient is slightly larger than that of swing check valve

Dimension

Yuanda Valve Group Co., Ltd., founded in 1994, is headquartered in Yincun, Longyao, Hebei, China, the hinterland of Bohai Economic Rim surrounding Beijing and Tianjin. With a registered capital of RMB 200 million, Yuanda currently has 8 subsidiaries, of which 6 are in China and 2 overseas. Among them, the core company, which covers an area of 540,000m2 and has more than 3500 employees, is the largest high,midium and low-pressure valve manufacturing base specializing in valve development, manufacturing, and sales in China.

Yuanda has obtained DNV·GL, ISO9001: 2015、ISO14001:2015、OHSAS18001:2007, API6D（6D-0759）, CE, KS, and EAC certifications. Its""trademark is evaluated as Famous Trademark of China and Famous Brand in Hebei Province, and the product series produced under"" is a trademark registered in Korea and products produced under this trademark enjoy a good reputation in both international and domestic markets. Yuanda has been named “Credit Management AA-Rating Enterprise” by the General Administration of Quality Supervision, Inspection and Quarantine and granted the title of “China Quality Trustworthy Enterprise” by China Entry and Exit Inspection and Quarantine Association. It is also a holder of Manufacture License of Special Equipment Level A and Casting Certificates Grades B, B1, and B2, and a member of China Valve Association council, a corporate member of China Foundry Association, and a provincial enterprise technology center in Hebei. Yuanda has been granted the power to carry out import and export operations on its own and is an approved supplier of PetroChina (CNPC) and Sinopec, Guodian, Huaneng, Huadian, Datang and China Power, and China Aluminum, CCESCC, Shougang, Wuhan Iron and Steel Company, and Hebei Iron and Steel Company.

Yuanda manufactures to standards including GB/JB(china), ANSI, API, AWWA, DIN, BS, JIS, EAC, NF and so on, and uses HT200, HT250, QT400, QT450, WCA, WCB, WCC, CF3, CF8, CF3M, CF8M, 1Cr5Mo, LCB, among others, to produce a great variety of valves including gate valves, globe valves, ball valves, butterfly valves, check valves, diaphragm valves, pressure-relief valves, plug valves, and traps, which are available in 12 main categories, 200 series and 4000 specs, totaling 120,000 tons a year. These products are widely used in all civil sectors covering petroleum, petrochemical, chemical, power generation, metallurgy, water system, pharmaceuticals, urban construction, and water supply and drainage.