ZT-ZKHJ180E Vacuum Brazing Machine
| Technology Parameters |
| Dimensions | 1020*680*1130mm (L*W*H) |
| Power Supply | 380V-3Phases-5Wires 50Hz |
| Chamber | Quartz Glass Tube |
| Rated Power | 20KW |
| Chamber Size | φ180*500*4 (T)mm |
| Max Temperature | 950° |
| Max Vacuum Rate | 10-6 Torr (10-4 Pa) |
| Brazing Vacuum Rate | 10-5 Torr (10-3 Pa) |
| Heating Source | 18 pcs halogen tubes |
| Chilling | Water cooling |
| Vacuum Process | Cleaning Fixing Flux Drying :200℃ 30mins Brazing |
Based on market competition and diversified needs of customers, our
company developed and produced ZT-ZKHJ180E vacuum brazing machine,
which adopts diffusion pump for high vacuum system, simplified
structure, automatic control.
Materials: Natural Diamond, Mono Crystal Diamond, PCD, PCBN, CVD
and Cermet.
Substrate Materials: Cermet, Tungsten Carbide, Steel, Stainless
Steel, Steel Alloy, Ceramics, etc.
Design Features:
• PLC control, SCR heating, touch panel, automatic running after
simple setting.
• Low vacuum mechanical pump and high vacuum diffusion pump.
• No oxidation, clean surface and environment-friendly.
• Brazing strength is 2 times higher than induction welding.
• The machine is fully automatic and once loaded, the cycle time is
approximately
70-120 minutes.
• Brazing quantity is more than 500 pcs (CNGA1204), reduces total
cost.
• Reduction of distortion, even a very small tool insert can be
brazed.
• Larger chamber can be customized.
