V-Belt Driven Q345 Backward Curved Wear Resistant Cement Blower Fan
Introduction
The 6-05 medium-pressure series fan can meet the performance
requirements of large flow and high pressure at the same time, and
has the characteristics of high efficiency and low noise. It is a
series centrifugal fan products with a wide range of performance.
It can be selected if the intake conditions are equivalent and the
performance is suitable.
It can be used to transport normal temperature or high temperature
clean gas, dusty gas, flammable gas, corrosive gas, powder or
granular materials, fiber materials, etc.
Technical data
| series | model | Rotation Speed
(r/min) | Total Pressure
(Pa) | Air Capacity
(m³/h) | Power
(kW) |
|---|
| 6-05 | 6C | 2000～2880 | 2079～5884 | 1598～4375 | 3～11 |
| 7C | 1680～2880 | 8012～5864 | 3655～6948 | 4～18.5 |
| 8C | 1500～2880 | 2079～10474 | 2842～10371 | 4～37 |
Product Features
1. The fan speed can be flexibly set by matching different belt
pulley diameters to make the fan run at the highest efficiency
point and reduce energy waste.
2. Motor slide guide can be provided for convenient belt tensioning
to reduce energy loss caused by belt slack.
3. The bearing housing is reserved for the installation position of
temperature and vibration sensors, which can facilitate the
installation of fan operation monitoring device.
4. Use liquid lubricating oil. It is not necessary to open the
bearing housing to replace and fill the lubricating oil. The
bearing housing is provided with an observation window for easy
observation of the quality and stock of the lubricating oil.
FAQ
1,What parameters need to be provided when you design the
industrial centrifugal fans?
A: Air flow, total pressure or static pressure, inlet temperature,
local voltage and frequency, Altitude etc.
If there is flammable and explosive gas, or big dust loading in the
medium, please also inform the designer.
2,How about your company’s pre-sales service and after-sales
service?
A: Before our cooperation, we have the professional technical team
to help you make the technical solution according to your working
condition, to make sure the centrifugal fan efficiency operation.
After sales service, we will offer 12 months’ repairing service,
and provide lifelong follow-up services. Besides, our engineers are
available for going abroad to offer the repairing service.
3,Does your company have qualifications?
A: SIMO Blower has obtained ISO 9001-2008, CE, BV certifications
and so on.
