Large Diameter 6-16" Low Carbon Steel Galvanized Johnson Screen
Pipe
wedge wire screens, v shaped wire welded stainless steel water well
screens, low carbon galvanized water well screen, Johnson screen
tube, johnson screen pipe, johnson well screen, johnson wire
screen, johnson filter screen, johnson v wire screens,v wire slot
tube, wire wrapped screen pipe, oil well screens, dewatering well
screen, perfect roundness screen tube, profile wire screen pipe,
reverse rolled screen tube, spiral screen tube, screen cylinders,
rod based continous slot screens, sand conrol well screen, wire
wound screen pipe, stainless steel filter elements, wedge wire roll
screen, stainless steel strainer pipe,
Xinlu Screens is one of the largest manufacturers of stainless
steel water well screens in the China. With a high open area,
allowing for better access to the entire formation around the
screen; fines and drilling fluid are removed quickly and
completely, resulting in a better well development.
Technical support and design assistance : 6-16" Low Carbon Steel Galvanized Johnson Screen Pipe
Sand analysis of formation materials
Screen size recommendations
Screen installation suggestions
Well construction consultation
Less Maintenance: 6-16" Low Carbon Steel Galvanized Johnson Screen Pipe
The continuous Vee-Wire slot design allows for lower entrance
velocity of the water, reducing encrustation rates. The slot design
also resists plugging and prevents sand from damaging pumps
Pumping Costs: 6-16" Low Carbon Steel Galvanized Johnson Screen Pipe
The high open area of the Vee-Wire well screen allows for water to
enter the well freely, resulting in minimal drawdown and less
energy usage by a pump.
Optimal Performance Through
Screens designed to site-specific yield requirements and aquifer
characteristics
Screen slot opening selected from formation sand sample analysis
Wire and rod construction to deliver required strength for the
specified well depth
Stainless material selected to maximize corrosion resistance for
water chemistry
Wide variety of fittings to facilitate secure and efficient
installation
Sand Control
Johnson Water Well Screen Pipe is a key component of the sand control system, either as an
integral component of the gravel pack, or as a standalone provider
of sand control. Vee-Wire technology and welded construction, help
to prevent well screen failure by better controlling the sand.
Customer Service: Custom well screens
Inform us of your specifications for the water well screen,
including diameter, slot opening size, length and percentage of
open area. Based on that information, we can customized your
products.
Main specs for 6-16" Low Carbon Steel Galvanized Johnson Screen Pipe
Well Screen material: stainless steel, galvanized low-carbon steel,
or custom materials
Slot opening size: 0.1mm-15mm
Diameter (inches): 2, 3, 4, 5, 6, 8, 10, 12, 14, 16, 20, 29-1000mm
Length: 2.9m, 5.85m. The maximum length is 6.05m
Connection method: beveled, circumferential welded, threaded
connection
6-16" Low Carbon Steel Galvanized Johnson Screen Pipe Specification
SIZE
(INCH) |
O.D (MM) |
SLOT (MM) |
LENGTH (M) |
COLLAPSE STRENGTH (BAR) |
TENSILE WEIGHT (TON) | WRAP WIRE (WIDTH*HEIGHT) (MM) | RODS (MM) |
| 3-1/2 | 88.9 | 1.0 | 3 | >22 | 10.2 | 2.3x3.5 | 3.8MM/22 |
| 4-1/2 | 114.3 | 1.0 | 3 | >28 | 11.5 | 2.3x3.5 | 3.8MM/22 |
| 6-5/8 | 168.3 | 0.75 | 5.8 | >40 | 12.8 | 2.3x3.5 | 3.8MM/32 |
| 6-5/8 | 168.3 | 1.0 | 5.8 | >33 | 12.8 | 2.3x3.5 | 3.8MM/32 |
| 6-5/8 | 168.3 | 0.63 | 5.8 | >83 | 45 | 3.2x6.0 | 6.0MM/32 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | >34 | 21.9 | 2.3x3.5 | 3.8MM/48 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | >50 | 38.2 | 3.0x5.0 | 4.0MM/48 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | >60 | 46 | 3.2x6.0 | 5.0MM/48 |
| 10-3/4 | 273.1 | 0.75 | 5.8 | >50 | 32.9 | 2.3x3.5 | 4.9MM/55 |
| 10-3/4 | 273.1 | 1.0 | 5.8 | >60 | 39.5 | 3.0x5.0 | 4.9MM/55 |
| 10-3/4 | 273.1 | 1.0 | 5.8 | >100 | 48 | 3.2x6.0 | 5.0MM/55 |
| 12-3/4 | 323.9 | 1.0 | 5.8 | >120 | 37.2 | 3.0x5.0 | 4.0MM/50 |
| 14 | 355.6 | 1.0 | 3 | >80 | 37.8 | 3.0x5.0 | 4.0MM/59 |
| PROFILE WIRE | | | | | | | | |
| WIDTH(mm) | 1.00 | 1.50 | 1.50 | 2.00 | 2.30 | 2.50 | 3.00 | 3.05 |
| HEIGHT(mm) | 2.00 | 2.00 | 2.50 | 3.80 | 3.50 | 4.00 | 4.60 | 6.35 |
| SUPPORT ROD | | | | | | ROUND |
| WIDTH(mm) | 1.80 | 2.00 | 2.50 | 3.00 | 3.00 | Ø2.5--Ø6mm |
| HEIGHT(mm) | 2.50 | 3.00 | 4.00 | 4.60 | 6.00 | ---- |
FAQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q2. What about the lead time?
A: 3-5 days for Sample preparing , 15-25 working days for mass
production.
Q3. Do you have any MOQ limit for the order?
A: Low MOQ, 3pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: Airline, sea shipping and rail transportation are all optional.
Or ship by EMS, DHL, UPS, FedEx or TNT, it takes 5-7 days to
arrive.
Q5. How to proceed an order?
A: Firstly let us know your need specification or application.
Secondly We quote according to your requirements or our
suggestions.
Thirdly customer confirms and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production.
