Tungsten Carbide Cutting Brazing Tips,YG8/YW2/YG15/YT15/YT5/YG20
A320 4160511 Brazing Blade
Carbide turning tools are welded with carbide inserts and carbon
steel shanks, which have high hardness, wear resistance and heat
resistance.
Cemented carbide inserts are made of high wear-resistant and
high-heat-resistant WC (tungsten carbide), TiC (titanium carbide),
TaC (tantalum carbide) and Co (cobalt) powders sintered at high
temperature. Check the official website of the knife.
1) Tungsten Cobalt (WC+Co) Blades
Tungsten-cobalt inserts, domestic nominal YG type, corresponding
international nominal K type, these alloy inserts are used to
process ferrous metals, non-ferrous metals and non-metallic
materials that produce short chips, such as cast iron, aluminum
alloy, copper alloy, plastic , Hard bakelite, etc. Commonly used
grades are YG3, YG6, YG8, etc.
2) Tungsten-titanium-cobalt (WC+TiC+Co) blades
Tungsten-titanium-cobalt blades, the domestic nominal YT type, and
the corresponding international nominal P type alloy blades are
used to process metal materials that produce long chips, such as
steel, cast steel, malleable cast iron, stainless steel,
heat-resistant steel, etc. Commonly used grades are YT5, YT15,
YT30, etc.
3) Tungsten-titanium-tantalum-cobalt (WC+TiC+TaC+co) blades
Tungsten-titanium-tantalum-cobalt inserts, national standard YW
class, corresponding to international nominal M class, these alloy
inserts are used to process ferrous or non-ferrous metals that
produce long chips and short chips, such as steel, cast steel,
austenitic stainless steel, resistant Hot steel, malleable cast
iron, alloy cast iron, etc.
3. Diamond (PCD) turning tool
Diamond turning tools mainly process non-ferrous metals and
non-metallic materials that require high finish such as copper,
aluminum, zinc, alloys, plastics, rubber, bakelite, etc. Diamond
turning tools have high finish and high wear resistance.
4. Cubic Boron Nitride (PCBN)
The cubic boron nitride turning tool mainly processes ferrous
metals with high hardness such as quenched steel and iron-based
powder metallurgy. This turning tool is characterized by high
hardness and high wear resistance.
5. CNC turning tool (indexable turning tool)
CNC turning tools are mainly used for a type of turning tools on
CNC machine tools. exchange sex,
3 Comments Share Report
| GRADE | ISO | DENSITY | HARDNESS | TRS | Applications recommended |
| GRADE | (g/cm3) | (HRA) | (N/mm2) |
| YG3 | K05 | 15.1 | 92 | 1400 | Suitable for finishing of cast iron and nonferrous metal. |
| YG6X | K10 | 14.95 | 91.5 | 1800 | The finishing & semi-finishing of cast iron and nonferrous metals
and also for the machining of manganese steel and hardening steel. |
| YG6 | K15 | 14.95 | 90.5 | 1900 | Suitable for the roughing of cast iron and light alloys and also
for the milling of cast iron and low-alloy steel. |
| YG8 | K20 | 14.8 | 89.5 | 2200 |
| YW1 | M10 | 13.1 | 91.6 | 1600 | Suitable for finishing and semi-finishing of stainless steel and
conventional alloy steel. |
| W2 | M20 | 13 | 90.6 | 1800 | The grade can be used for the semi-finishing of stainless steel and
low-alloy steel and it is mainly used for the machining of railway
wheel hubs. |
| YT15 | P10 | 11.4 | 91.5 | 1600 | Suitable for the finishing and semi-finishing for steel and cast
steel with a moderate feed rate and rather high cutting speed. |
| YT14 | P20 | 11.6 | 90.8 | 1700 | Suitable for the finishing and semi-finishing of steel and cast
steel. |
| YT5 | P30 | 12.9 | 90.5 | 2200 | Suitable for the heavy duty rough turning of and cast steel with a
big feed rate at a medium and low speed under unfavorable working
conditions. |
YG3: suitable for finishing of cast iron and non-ferrous metals
YG6X, YG6A: suitable for finishing and semi-finishing of cast iron
and non-ferrous metals, as well as for manganese steel and hardened
steel.
YG6, YG8: suitable for rough machining of cast iron and light
alloy, and also for milling of cast iron and low alloy steel
YW1, YW3, YW4: suitable for finishing and semi-finishing of
stainless steel and common alloy steel
YW2: suitable for semi-finishing of stainless steel and low-alloy
steel, mainly used for the processing of train tires
YT15, YT05: suitable for finishing and semi-finishing of steel and
cast steel, medium feed and high cutting speed should be used
YT14, YS25: suitable for finishing and semi-finishing of steel and
cast steel, medium feed should be used, YS25 is specially used for
steel, cast steel milling speed
YT5: suitable for steel, cast steel.
Application Instructions for Welded Inserts Carbide Inserts
1. Welded cutting tool structure should have sufficient rigidity
Sufficient rigidity is ensured by the maximum allowable dimensions
and heat treatment of higher strength steel grades
2. Carbide inserts should be firmly fixed
Cemented carbide inserts should have a sufficient degree of
reliability, which is guaranteed by the kerf and welding quality.
Therefore, the shape of the insert groove should be selected
according to the shape of the insert and the geometric parameters
of the insert.
