YG15X Various Type Fine-Grained Alloy, It Is Suitable For Products
With High Life Expectancy And Has Good Weldability.
The use of cemented carbide strips
Application fields of carbide strips
Carbide strips processed into knives are widely used in ceramics,
printing machinery, forestry, rubber, plastics, light textile
industry, cigarette machinery, packaging materials, cables,
shipbuilding, metallurgical machinery, electronics, leather and
other industries, such as circular hard alloys. Alloy blade,
asbestos gas cutting machine plastic granulator roll blade, round
blade, slitting blade, sheet metal processing blade and other
standard and non-standard mechanical blades.
Carbide strips are mainly used for cutting metal, wood, paper and
other fields, therefore, their high quality is required to obtain
longer life cycle and cutting speed.
Carbide bars are suitable for machining chilled cast iron and alloy
steel. It can also be used in the production of precision
machining, precision cast iron and wear parts.
Carbide strips have good flexural strength and wear resistance, not
only for slow rough turning, heat-resistant Alois milling and
semi-finishing of titanium, stainless, low-alloy steels, but also
for machining Production of glass fiber reinforced plastic and PCB
micro-drilling, etc.
ST07 ISO grade K05, ultra-fine grain, for planers and indexable
inserts for hardwoods.
RX20 ISO grade K10, ultra-fine grain, high wear resistance and
toughness, suitable for woodworking tools such as hardwood,
particleboard, MDF processing.
RX30 ISO grade K20, ultra-fine grain, the first choice for
processing hardwood strips, suitable for making all kinds of
indexable inserts, forming inserts and planers for roughing and
general machining of softwood and hardwood, etc., can also be used
for machining Medium and high density plate, cast iron, non-ferrous
metal and non-ferrous metal processing, special grade for spiral
milling cutter.
SK40S ISO grade K20 has ultra-high wear resistance, anti-bonding
ability and thermal strength, suitable for processing high
temperature alloys, stainless steel, high manganese steel and other
materials.
AB10 ISO grade K20, with good wear resistance and strength, high
cutting speed and small tool diameter. Suitable for processing
wood, plywood and slatted fibreboard.
RX9.5 IS0 grade K05, with good wear resistance and strength, used
to cut plastic and metal sheets, etc., good welding performance,
good sharpness, widely used in pelletizer hob.
YG15 has high cobalt content and good toughness. It is suitable for
long paper cutting knives with long welding surfaces. It has
largely replaced high-speed steel for film cutting and textile
cutting.
YG15X is a fine-grained alloy, which improves the hardness on the
basis of YG15. It is suitable for products with high life
expectancy and has good weldability.
Thin and narrow strips display
Punch wide and narrow strips
Non-magnetic products production process
Equipment Exhibition
Testing Equipment
