24V 12V Customized Micro Bldc Inner Rotor Motor 2230 Brushless
Motor For Hair Curler
Description Of Micro BLDC inner Rotor Motor
Micro BLDC Motor are highly commended by customers because of its easy operation,
compact design, long using life, stable performance, low failure
rate and high technical performances.
1. Voltage: DC 24V or as request
2. No load speed: 8000-9000rpm
3. No load current: 1.2A
4. Motor size: Diameter 22mm, length 30mm, regular shaft dia 3.0mm
5. Weight: 32g Approx
6. Application:Hair curler, auto parts motor, water pump, wiper,
Robot, Bike lock, Home Appliance, Door Lock etc
| MODEL | VOLTAGE | NO LOAD | AT MAXIMUM EFFICIENCY | STALL |
SPEED
RPM | CURRENT
A | SPEED
RPM | TORQUE
gf.cm | CURRENT
A | TORQUE
gf.cm | CURRENT
A |
| BLS-2230I | 24 | 8000 | 0.16 | 6000 | 80 | 0.5 | 300 | 1 |
Motor dimensions
Performance curve
To be customized:
1. Expected voltage type
2. Configurable shaft length and second shaft end
3. Extended temperature range
4. Modified shaft dimensions and pinion configurations such as
flats, gears, pulleys and eccentrics
5. Customization for high-speed and/or high-load applications
6. Customize motors with higher electrical or mechanical tolerance
requirements
No Brushes = No Maintenance
The Brushless DC motors (BLDC motors) save time and cost by
eliminating the need for brushes that often require replacement
and/or maintenance.
Motor selection criterias for evaluation:
1. Size/Space: The available space for the motor.
2. Rated parameters: rated load, rated speed, rated current,
rotation direction, etc.
3. Output requirements: load stability or change, speed stability
or change, shaft and drive system (gearbox, propeller, etc.), start
and stop conditions, clockwise or counterclockwise rotation.
4. Power supply: battery, AC power supply, PWM, etc.
5. Working environment: working temperature, humidity,
rain/dust/sand/salinity, vibration (if installed on a moving
vehicle), audible noise, electromagnetic interference, safety and
other protection requirements.
6. Working conditions: continuous or cyclic, expected product life.
