Through Bore Slip Ring With 20-50 Amps Circuits
Slip rings enable the transfer of electric power or signal across a
rotating part, such as those
found in radar antennae, gun turrets, periscopes, electro-optic
sensor gimbals and space satellites. The sliding contact is
established by a brush that presses against a metal ring. The
“brush” looks like a brush made from metal fibers, but more often
it looks like a single wire or a spring with a pad of material
affixed to the end that contacts the ring. This LPT060 slip ring
with through bore size 60 mm, it can combine with
power,signal,Ethernet,USB,Control Net,CANBUS, PROFIBUS, It could
also be mounted by shaft or optional flange mounting.
| Electronic & Electruc | Mechanical |
| Circuits | Total | 6CKT | Working Speed | 0~350rp |
| Detail | 14X5A | Inner Diameter | Φ60mm |
| Rating Voltage | 240VAC/ DC | Contact Material | Precious Metal |
| Dielectric Strength | 1000VAC@50Hz | Housing Material | Aluminum Alloy |
| Insulation Resistance | ≥500MΩ@500VDC | Lead Wire Length | Stator:300mm Rotor:300mm |
| Environment | Remarks |
| Working Temperature | -20°C~+60° | Other | / |
| Working Humidity | ≤60%RH |
LPT060-0605-Outline Drawing
LPT060-0610-Outline Drawing
LPT060-0615-Outline Drawing
LPT060-1205-Outline Drawing
LPT060-1210-Outline Drawing
LPT060-1215-Outline Drawing
LPT060-1405-Outline Drawing
LPT060-1805-Outline Drawing
LPT060-1810-Outline Drawing
LPT060-1815-Outline Drawing
LPT060-2405-Outline Drawing
LPT060-2410-Outline Drawing
LPT060-2410-Outline Drawing
