YL10.2/YG8 Long Strip Cutting Tool For Processing And Processing
Lithium Battery Copper Foil And Aluminum Foil
ungsten Carbide strip is used for cutting lithium battery copper
foil and aluminum foil ,general wood cutters, hard wood cutters,
plastic and tobacco, as well as to making drawing dies, wear parts
and module core for punching parts and automatic press and etc.
Solid Tungsten Carbide Grinding Strips
Tungsten carbide strip description
1, the purity of more than 99.95% of raw materials, impurities,
less physical properties of the plate more stable;
2, the use of spray drying technology, the material in the fully
sealed conditions using high purity nitrogen protection,
effectively reduce the mixing process in the preparation of the
possibility of oxygen, better purity, the material is not easy to
dirty;
3, the density of tungsten carbide strip uniform: 300Mpa isostatic
pressing machine to suppress, effectively prevent the production of
defects, the plate density is more uniform;
tungsten carbide plate Characteristics
1, Tungsten carbide strip with fine compactness, strength and hardness indicators are in line
with the standard: the use of low-pressure sintering technology, so
that the pores within the plate to be effectively eliminated, the
quality is more stable.
2, the use of cryogenic treatment technology, so that the internal
microstructure of carbide strip to be improved, the internal stress can be greatly reduced,
effectively avoid the plate in the cutting process of the
possibility of cracks generated;
Tungsten carbide plate application
1, suitable for the production of cast iron roll and high nickel
chrome roll dressing knife;
2, for the production of discharge plate, stamping die, punch,
electronic progressive die and other stamping die, etc.
Tungsten carbide strip dimensions and grade
| THICKNESS | WIDTH | LENGTH |
| Size | Tolerance | Size | Tolerance | Size | Tolerance |
| 1~3 | 0~+0.3 | 4~6 | 0~+0.2 | 5~30 | 0~+0.5 |
| 3~5 | 0~+0.4 | 6~10 | 0~+0.3 | 30~60 | 0~+1 |
| 5~8 | 0~+0.5 | 10~15 | 0~+0.4 | 60~100 | 0~+1.5 |
| 8~12 | 0~+0.8 | 15~20 | 0~+0.5 | 100-150 | 0~+2 |
| 12~15 | 0~+1 | 20~25 | 0~+0.8 | 150~200 | 0~+2.5 |
| >15 | 0~+1.2 | 25~30 | 0~+1 | 200~250 | 0~+3 |
| | 30~40 | 0~+1.5 | 250~300 | 0~+4 |
| | 40~50 | 0~+2 | 300~350 | 0~+5 |
| | 50~80 | 0~+3 | 350~450 | 0~+8 |
| | >80 | 0~+5 | 450~1500 | 0~+10 |
| 1,The deformation amount of the plane of ordinary specifications is
no more than 0.3mm, and that of the side is no more than 0.5mm |
| 2,Thickness <2MM, width BBB 0 20MM, lateral deformation less
than or equal to 1MM |
Super long strip display
